Landslide werning system detection using raspberry PI, arduino and zigbee

Project Report Submitted in partial fulfillment of the requirements for the degree of Bachelor of EXTC Engineering.In this project we are going to study about Landslide warning system, as the occurrence of\ud landslides is a big loss for human life and property. We can’t stop the natural causes but we can\ud be alert before they occur. So for alerting people from landslides we use this technique. In this\ud design we have used three sensors of Angle sensor which gives the readings of slope angle if\ud there is any movement in landslide and we have Liquid level sensor it collects the depth of water\ud at the mountains. Temperature sensor gives the changes in the temperature. These all nodes of\ud sensors are connected to the Raspberry pi for collection of data. As the data is collected then all\ud the readings are given to Zigbee for transmission. As we obtain the information at the receiver\ud side by LCD display at receiver station or by SMS we can alert the people and save lives and\ud property. Thus this project is very important as we use it in our real time purpose for saving lives\ud and property. This design combines of wireless communication technology and Wireless Sensor\ud Network