Building a Flood-Warning Framework for Ungauged Locations Using Low Resolution, Open-Access Remotely Sensed Surface Soil Moisture, Precipitation, Soil, and Topographic Information

Soil moisture (SM) plays an important role in determining the antecedent condition of a watershed, while topographic attributes define how and where SM and rainfall interact to create floods. Based on this principle, we present a method to identify flood risk at a location in a watershed by using remotely sensed SM and open-access information on rainfall, soil properties, and topography. The method consists of three hydrologic modules that represent the generation, transfer, and accumulation of direct runoff. To simplify the modeling and provide timely warnings, the flood risk is ascertained based on frequency of exceedance, with warnings issued if above a specified threshold. The simplicity of the method is highlighted by the use of only three parameters for each watershed of interest, with effective regionalization allowing use in ungauged watersheds. For this proof-of-concept study, the proposed model was calibrated and tested for 65 hydrologic reference stations in the Murray–Darling Basin in Australia over a 35-year study period by using satellite-derived surface SM. The three model parameters were first estimated using the first ten-year data and then the model performance was evaluated through flood threshold exceedance analyses over the remaining 25-year study period. The results for estimated parameters and skill scores showed promise. The three model parameters can be regionalized as a function of watershed characteristics, and/or representative values estimated from neighboring watersheds, allowing use in ungauged basins everywhere