Experimental investigation of drying shrinkage and creep of concrete using fibre-optic sensors

Drying shrinkage and creep are two of the most important time-dependent properties of concrete, and the health monitoring of any large-scale concrete structure is practically the monitoring of the combined effects of these two physical properties. We present a fibre-optic sensing technique using fibre Bragg grating (FBG) sensors for the experimental investigation of drying shrinkage and creep of structural grade (40 MPa) concrete. It offers many advantages over the conventional electrical and mechanical methods for both structural health monitoring and standard tests of the mechanical properties. The FBG sensors are directly embedded into concrete specimens and the data are obtained by an optical measurement system. Standard mechanical method, as specified by the Australian Standards, is also used for comparison. Good agreements between the two methods are achieved for both drying shrinkage and creep. The long-term behaviours are predicted from the experimental data, and the accuracies of prediction are discussed. This optical technique can yield a strain resolution of better than 3 ìå