A study was conducted to test the effects of three mower cutting speeds (2300, 2500 and 2700 rpm), three varieties of sweet potato (VitAto, Orange and Stone) at three different moisture contents of the plant (22.4, 30.39 and 41.06 %), wet base (wb %) on tractor fuel consumption (ml/m). The results showed that all the treatments were significant at p ‹ 0.01 significance level for fuel consumption (ml/m). The best fuel consumption of 1.49 ml/m was achieved when using the Stone variety of sweet potato at 22.4 % moisture content and 2300 rpm mower speed. Data were analyzed statistically using ANOVA and the least significant difference LSD calculated at 1 % to estimate the differences between the averages
The objective of this study is to determine the operating characteristics of economical PTO operatio...
Tractors are mainly applied in agriculture. The share of import in the structure of tractor machiner...
A study was conducted to investigate the effects of three different knife angles (30, 40 and 50°) an...
In this study, fuel consumption values needed for the machine to operate (machine activity) and for ...
A rotary mower with five different blade cutting angles was tested at five different cutting speeds ...
A rotary mower with five different blade cutting angles was tested at five different cutting speeds ...
Rising fossil fuel prices are leading to an increasing awareness of energy efficiency in plant produ...
The objectives of this study are to estimate energy (fuel) consumption during tillage and planting o...
Many forage sweet potatoes (Ipomoea batatas (L) Lam) cultivars have not been adequately evaluated fo...
The field experiment was conducted in one of college of agricultural fields – university of Baghdad ...
ABSTRACT The use of fuels for agricultural Diesel engines cycle, both of mineral origin (Diesel) or ...
Numerio antraštė: Development of agricultural technologies and technical means in ecological and ene...
WOS: 000279315400005The objective of this study is to determine the operating characteristics of eco...
Vertical wheel load and tire pressure are both easily managed parameters which play a significant ro...
Nowadays, tractor is still the basic power unit in almost all production processes in agriculture, i...
The objective of this study is to determine the operating characteristics of economical PTO operatio...
Tractors are mainly applied in agriculture. The share of import in the structure of tractor machiner...
A study was conducted to investigate the effects of three different knife angles (30, 40 and 50°) an...
In this study, fuel consumption values needed for the machine to operate (machine activity) and for ...
A rotary mower with five different blade cutting angles was tested at five different cutting speeds ...
A rotary mower with five different blade cutting angles was tested at five different cutting speeds ...
Rising fossil fuel prices are leading to an increasing awareness of energy efficiency in plant produ...
The objectives of this study are to estimate energy (fuel) consumption during tillage and planting o...
Many forage sweet potatoes (Ipomoea batatas (L) Lam) cultivars have not been adequately evaluated fo...
The field experiment was conducted in one of college of agricultural fields – university of Baghdad ...
ABSTRACT The use of fuels for agricultural Diesel engines cycle, both of mineral origin (Diesel) or ...
Numerio antraštė: Development of agricultural technologies and technical means in ecological and ene...
WOS: 000279315400005The objective of this study is to determine the operating characteristics of eco...
Vertical wheel load and tire pressure are both easily managed parameters which play a significant ro...
Nowadays, tractor is still the basic power unit in almost all production processes in agriculture, i...
The objective of this study is to determine the operating characteristics of economical PTO operatio...
Tractors are mainly applied in agriculture. The share of import in the structure of tractor machiner...
A study was conducted to investigate the effects of three different knife angles (30, 40 and 50°) an...