Ba0.6Sr0.4TiO3 was prepared through slow rate sol-gel route, characterized and investigated to determine the suitability as a dielectric material in the capacitor of a DRAM cell. X-ray diffractometer results show that single phase formation occurred at 800°C. The crystalline size of Ba0.6Sr0.4TiO3 was found to be in the range of 74.21 nm to 98.76 nm. Scanning electron microscopy analysis shows that the particles are spherical in nature and in the sample calcined at 800°C do not agglomerate. The dielectric constant range ranges from 408 to 1042 and the dielectric loss ranges (measured at 1 kHz) from 0.065 to 0.232
This paper reports on the benefits gathered from a proper colloidal dispersion/deagglomeration of a ...
Ferroelectric thin films of Ba0.7Sr0.3TiO3, Ba0.8Sr0.2TiO3, Ba0.9Sr0.1TiO3 and BaTiO3 were fabricate...
A Pt/BST/NiFe/Cu multilayered capacitor was fabricated incorporating a polycrystalline Ba0.5Sr0.5TiO...
Nano-grained Barium Titanate based ceramics are of interest, for applications in ultra thin dielectr...
Barium Strontium Titanate (BST) solid solution is a strong candidate material for application in tun...
Barium Strontium Titanate (BST) solid solution is a strong candidate material for application in tun...
The sol-gel derived powders of the chemical composition (Ba0.6Sr0.4)TiO3 (BST) were used in the prep...
We report the use of a novel powder-in-sol precursor hybrid processing route to synthesize dense, ho...
Barium strontium titanate (BST) and iron doped barium strontium titanate (BSTF) ceramics with genera...
The goal of this research was to examine how the dielectric properties of barium strontium titanate ...
Barium Strontium Titanate (Ba1-xSrxTiO3) or BST has been synthesized using solid state reaction meth...
Studies were carried out on the preparation and properties of the composites made from cellulose ace...
Ba1-xSrxTiO3(BST) solid solution with x=0.3,0.4 and 0.5 were prepared by sol-gel method. (Ba, Sr) ac...
International audienceIn this work, BaxSr1-xTiO3 solgel thin films (x=0.7, 0.5 and 0.3) deposited on...
AbstractNano-crystalline barium strontium titanate, Ba0.5Sr0.5TiO3, (BST) powders were synthesized b...
This paper reports on the benefits gathered from a proper colloidal dispersion/deagglomeration of a ...
Ferroelectric thin films of Ba0.7Sr0.3TiO3, Ba0.8Sr0.2TiO3, Ba0.9Sr0.1TiO3 and BaTiO3 were fabricate...
A Pt/BST/NiFe/Cu multilayered capacitor was fabricated incorporating a polycrystalline Ba0.5Sr0.5TiO...
Nano-grained Barium Titanate based ceramics are of interest, for applications in ultra thin dielectr...
Barium Strontium Titanate (BST) solid solution is a strong candidate material for application in tun...
Barium Strontium Titanate (BST) solid solution is a strong candidate material for application in tun...
The sol-gel derived powders of the chemical composition (Ba0.6Sr0.4)TiO3 (BST) were used in the prep...
We report the use of a novel powder-in-sol precursor hybrid processing route to synthesize dense, ho...
Barium strontium titanate (BST) and iron doped barium strontium titanate (BSTF) ceramics with genera...
The goal of this research was to examine how the dielectric properties of barium strontium titanate ...
Barium Strontium Titanate (Ba1-xSrxTiO3) or BST has been synthesized using solid state reaction meth...
Studies were carried out on the preparation and properties of the composites made from cellulose ace...
Ba1-xSrxTiO3(BST) solid solution with x=0.3,0.4 and 0.5 were prepared by sol-gel method. (Ba, Sr) ac...
International audienceIn this work, BaxSr1-xTiO3 solgel thin films (x=0.7, 0.5 and 0.3) deposited on...
AbstractNano-crystalline barium strontium titanate, Ba0.5Sr0.5TiO3, (BST) powders were synthesized b...
This paper reports on the benefits gathered from a proper colloidal dispersion/deagglomeration of a ...
Ferroelectric thin films of Ba0.7Sr0.3TiO3, Ba0.8Sr0.2TiO3, Ba0.9Sr0.1TiO3 and BaTiO3 were fabricate...
A Pt/BST/NiFe/Cu multilayered capacitor was fabricated incorporating a polycrystalline Ba0.5Sr0.5TiO...