Comparison of Methods for Estimating Mechanical Properties of Wood by NIR Spectroscopy

Near-infrared (NIR) spectroscopy provides a rapid alternative to traditional methods of wood property assessment. For organizations who assess wood properties on a large scale, multisite, multispecies calibrations are of practical interest. We examined NIR spectroscopy for the estimation of density (at 12% moisture content), modulus of elasticity (MOE), and modulus of rupture (MOR) using clear wood samples obtained from several pine species (Pinus caribaea var. bahamensis, var. hondurensis, and var. caribaea, P. chiapensis, P. maximinoi, P. oocarpa, P. taeda, and P. tecunumanii). We compared different methodologies for collecting spectra, that is, benchtop instrument versus benchtop fiber-optic probe and field portable fiber-optic probe, and different wood surfaces (radial and transverse). Calibrations based on the benchtop instrument were superior to those obtained using the fiber-optic probe systems. Difficulty with adequately representing the sample when collecting spectra using a fiber-optic probe and lower quality spectra explain the differences among the data sets. Spectra collected from radial and transverse surfaces provided similar calibration statistics. The calibrations obtained for density (R2 = 0.81, SECV = 38.5 kg/m3) and MOE (R2 = 0.81, SECV = 1124 GPa) using benchtop instrument spectra demonstrate that it is possible to obtain general calibrations for estimating the wood properties of a number of tropical, subtropical, and temperate pine species