This letter presents a microstrip differential-mode (DM) bandpass filter (BPF) with high and wide stopband suppression under both DM and common-mode (CM) operations. A new coupling topology is formed up to realize the DM BPF by integrating a pair of λ/2 microstrip transmission lines and two multimode resonators. The DM and CM equivalent half-circuits are established to explain the operating principal. For validation, a DM BPF operating at 2.2 GHz is implemented. Experimental results indicate that the presented DM BPF exhibits not only sharp DM passband selectivity but also deep and ultrawide stopband suppression of more than 30 dB for both DM and CM
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy.A t...
Common mode noise on differential microstrip lines can be suppressed by PCB embedded filters. These ...
A wideband common-mode (CM) suppression filter for bend discontinuities in differential signaling is...
This paper presents a novel approach for the implementation of balanced ultra-wideband (UWB) bandpas...
The objective of this PhD thesis is to design and implement a class of differential–mode ultra–wideb...
A compact ultra-wideband bandpass filter with good upper-stopband performance is presented. A wide s...
A compact, differential diplex filtenna (DDF) with common-mode (CM) suppression is presented. A rect...
A new type of bend is proposed that reduces differential-to-common mode conversion occuring at the b...
The objective of this report is to study and simulate a class of differential–mode ultra– wid...
A broadside-coupled structure is utilized to design balanced bandpass filter (BPF) with ultrawideban...
Differential (balanced) microstrip bandpass filters (BPFs) implemented by combining open split ring ...
Copyright © 2014 Wiley Periodicals, Inc. A compact wideband bandpass filter (BPF) with a broad stopb...
As differential signaling becomes more and more desirable, innovative solutions must be sought to ke...
A wideband common-mode (CM) suppression reconfigurable filter is proposed for high-speed all-pass di...
[[abstract]]This paper presents a new balanced dual-band bandpass filter (BPF) designed for 2.4/5.2 ...
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy.A t...
Common mode noise on differential microstrip lines can be suppressed by PCB embedded filters. These ...
A wideband common-mode (CM) suppression filter for bend discontinuities in differential signaling is...
This paper presents a novel approach for the implementation of balanced ultra-wideband (UWB) bandpas...
The objective of this PhD thesis is to design and implement a class of differential–mode ultra–wideb...
A compact ultra-wideband bandpass filter with good upper-stopband performance is presented. A wide s...
A compact, differential diplex filtenna (DDF) with common-mode (CM) suppression is presented. A rect...
A new type of bend is proposed that reduces differential-to-common mode conversion occuring at the b...
The objective of this report is to study and simulate a class of differential–mode ultra– wid...
A broadside-coupled structure is utilized to design balanced bandpass filter (BPF) with ultrawideban...
Differential (balanced) microstrip bandpass filters (BPFs) implemented by combining open split ring ...
Copyright © 2014 Wiley Periodicals, Inc. A compact wideband bandpass filter (BPF) with a broad stopb...
As differential signaling becomes more and more desirable, innovative solutions must be sought to ke...
A wideband common-mode (CM) suppression reconfigurable filter is proposed for high-speed all-pass di...
[[abstract]]This paper presents a new balanced dual-band bandpass filter (BPF) designed for 2.4/5.2 ...
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy.A t...
Common mode noise on differential microstrip lines can be suppressed by PCB embedded filters. These ...
A wideband common-mode (CM) suppression filter for bend discontinuities in differential signaling is...