Microstructural properties of ultrathin (1-10 nm) tetrahedral amorphous carbon (ta-C) films are investigated by Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopy, X-ray Photoelectron Spectroscopy, Raman spectroscopy and Atomic Force Microscopy (AFM). The CK-edge NEXAFS spectra of 1 nm ta-C films provided evidence of surface defects (C - H bonds) which rapidly diminish with increasing film thickness. A critical thickness for stabilization of largely sp 3 matrix structure distorted by sp 2 sites is observed via the change of ?*C*C peak behavior. Meanwhile, an increase in the film thickness promotes an enhancement in sp 3 content, the film roughness remains nearly constant as probed by spectroscopic techniques and AFM, respective...
The properties of a highly sp3 bonded form of amorphous carbon denoted ta-C deposited from a filtere...
The influence of substrate bias and hydrogen/nitrogen incorporation on the optical properties [studi...
Undoped and nitrogen-doped amorphous carbon (ta-C) films deposited using a filtered cathodic vacuum ...
Microstructural properties of ultrathin (1-10 nm) tetrahedral amorphous carbon (ta-C) films are inve...
Molecular dynamics simulation was performed to investigate the effect of thickness on the properties...
A cross-sectional transmission electron microscope study of the low density layers at the surface an...
We preform a quantitative investigation of the energetics of thermally induced sp3 → sp2 conversion ...
Surface and bulk properties of the Filtered Cathodic Vacuum Arc prepared nitrogenated tetrahedral am...
Tetrahedral amorphous carbon (ta-C) thin films were deposited using both the filtered cathodic vacuu...
Surface and bulk properties of the Filtered Cathodic Vacuum Arc prepared nitrogenated tetrahedral am...
Tetrahedral amorphous carbon films with 70%-88% sp3 content are studied by atomic force microscopy (...
The paper presents results of studies on the structure of tetrahedral amorphous carbon films (ta-C) ...
Detailed information about the physicochemical properties of a given surface is important in order t...
Wear in self-mated tetrahedral amorphous carbon (ta-C) films is studied by molecular dynamics and ne...
Mechanically hard ha-C and soft sa-C amorphous carbon films of 2.9 and 2.2 g cm-3 approximate de...
The properties of a highly sp3 bonded form of amorphous carbon denoted ta-C deposited from a filtere...
The influence of substrate bias and hydrogen/nitrogen incorporation on the optical properties [studi...
Undoped and nitrogen-doped amorphous carbon (ta-C) films deposited using a filtered cathodic vacuum ...
Microstructural properties of ultrathin (1-10 nm) tetrahedral amorphous carbon (ta-C) films are inve...
Molecular dynamics simulation was performed to investigate the effect of thickness on the properties...
A cross-sectional transmission electron microscope study of the low density layers at the surface an...
We preform a quantitative investigation of the energetics of thermally induced sp3 → sp2 conversion ...
Surface and bulk properties of the Filtered Cathodic Vacuum Arc prepared nitrogenated tetrahedral am...
Tetrahedral amorphous carbon (ta-C) thin films were deposited using both the filtered cathodic vacuu...
Surface and bulk properties of the Filtered Cathodic Vacuum Arc prepared nitrogenated tetrahedral am...
Tetrahedral amorphous carbon films with 70%-88% sp3 content are studied by atomic force microscopy (...
The paper presents results of studies on the structure of tetrahedral amorphous carbon films (ta-C) ...
Detailed information about the physicochemical properties of a given surface is important in order t...
Wear in self-mated tetrahedral amorphous carbon (ta-C) films is studied by molecular dynamics and ne...
Mechanically hard ha-C and soft sa-C amorphous carbon films of 2.9 and 2.2 g cm-3 approximate de...
The properties of a highly sp3 bonded form of amorphous carbon denoted ta-C deposited from a filtere...
The influence of substrate bias and hydrogen/nitrogen incorporation on the optical properties [studi...
Undoped and nitrogen-doped amorphous carbon (ta-C) films deposited using a filtered cathodic vacuum ...