Add to ORKGThe reference model for CAD systems developed by the Gesellschaft fur Informatik (GI -- the German membership organization of IFIP) is a frame for classifying the functionality of CAD systems. Whereas the reference model regards the user interface as one of several modules of the CAD system, the user interface appears to the user as being the whole system. This is the reason why an additional task working group on CAD user interfaces has been established by the GI in order to develop recommendations for the design of CAD user interfaces. Proceeding and preliminary results of the working group are described.
The CAD systems which are available today have deficits particularly with regard to the quality of w...
The requirements on CAD tools vary with specific needs postulated by users and their tasks, by the t...
Includes bibliographical references (pages 52-53)This report presents the major problems faced by th...
The reference model for CAD systems developed by the G Informatik (GI - the German membership organi...
CAD technology has already repeatedly penetrated the technical areas of industrial companies and doe...
The general problem of software and hardware interface has been discussed since the first personal c...
Today, effective use of CAD systems depends on individual application related system extensions whic...
By reason of the rather complicated handling of today's CAD systems well qualified and trained users...
The present first report on the work conducted within the frame of the joined project 'CAD reference...
A reference model is presented, which describes the global functionality of a CAD system in a manufa...
This paper will give a short overview of developments and methods in the area of graphical user inte...
This paper will give a short overview of developments and methods in the area of graphical user inte...
Several tools for working with guidelines already exist, both as commercial products as well as with...
The design engineering process is analysed from a cognitive ergonomics point of view, relating it to...
The University of Lowell's Graphics Research Laboratory (ULowell, in Lowell, MA, USA) and the Fraunh...
The CAD systems which are available today have deficits particularly with regard to the quality of w...
The requirements on CAD tools vary with specific needs postulated by users and their tasks, by the t...
Includes bibliographical references (pages 52-53)This report presents the major problems faced by th...
The reference model for CAD systems developed by the G Informatik (GI - the German membership organi...
CAD technology has already repeatedly penetrated the technical areas of industrial companies and doe...
The general problem of software and hardware interface has been discussed since the first personal c...
Today, effective use of CAD systems depends on individual application related system extensions whic...
By reason of the rather complicated handling of today's CAD systems well qualified and trained users...
The present first report on the work conducted within the frame of the joined project 'CAD reference...
A reference model is presented, which describes the global functionality of a CAD system in a manufa...
This paper will give a short overview of developments and methods in the area of graphical user inte...
This paper will give a short overview of developments and methods in the area of graphical user inte...
Several tools for working with guidelines already exist, both as commercial products as well as with...
The design engineering process is analysed from a cognitive ergonomics point of view, relating it to...
The University of Lowell's Graphics Research Laboratory (ULowell, in Lowell, MA, USA) and the Fraunh...
The CAD systems which are available today have deficits particularly with regard to the quality of w...
The requirements on CAD tools vary with specific needs postulated by users and their tasks, by the t...
Includes bibliographical references (pages 52-53)This report presents the major problems faced by th...