Orientation of cellulose nanowhiskers (CNWs) derived from tunicates, in an all-cellulose nanocomposite, is achieved through the application of a magnetic field. CNWs are incorporated into a dissolved cellulose matrix system and during solvent casting of the nanocomposite a magnetic field is applied to induce their alignment. Unoriented CNW samples, without the presence of a magnetic field, are also produced. The CNWs are found to orient under the action of the magnetic field, leading to enhanced stiffness and strength of the composites, but not to the level that is theoretically predicted for a fully aligned system. Lowering the volume fraction of the CNWs is shown to allow them to orient more readily in the magnetic field, leading to large...
The design and production of anisotropic composites and nanocomposites has become increasingly relev...
Modern society's demand for biobased and sustainable materials is increasing annually. Environmental...
Thesis (Ph.D.), Materials Science and Engineering Program, Washington State UniversityIn this resear...
Orientation of cellulose nanowhiskers (CNWs) derived from tunicates, in an all-cellulose nanocomposi...
The magnetic alignment of cellulose nanocrystals (CNC) and lepidocrocite nanorods (LpN), pristine an...
Studies that involve natural fiber orientation in a matrix were mostly based on regulating shear for...
This paper reports a single-step co-precipitation method for the fabrication of magnetic cellulose n...
“The final publication is available at Springer via http://dx.doi.org/10.1007/s10853-015-9409-y”.Ope...
Regenerated cellulose formed into cellulose nanofibers under strong magnetic field and aligned perpe...
Orientation of cellulose nanowhiskers (CNWs) within various matrices is an effective approach that a...
ABSTRACT: This work presents the development of dry spun cellulose acetate (CA) fibers using cellulo...
This work presents the development of dry spun cellulose acetate (CA) fibers using cellulose nanocry...
The molecular deformation and crystal orientation of a range of next generation regenerated cellulos...
Electrospinning is a fiber production method that has gained a special attention due to the simple s...
AbstractThe molecular deformation and crystal orientation of a range of next generation regenerated ...
The design and production of anisotropic composites and nanocomposites has become increasingly relev...
Modern society's demand for biobased and sustainable materials is increasing annually. Environmental...
Thesis (Ph.D.), Materials Science and Engineering Program, Washington State UniversityIn this resear...
Orientation of cellulose nanowhiskers (CNWs) derived from tunicates, in an all-cellulose nanocomposi...
The magnetic alignment of cellulose nanocrystals (CNC) and lepidocrocite nanorods (LpN), pristine an...
Studies that involve natural fiber orientation in a matrix were mostly based on regulating shear for...
This paper reports a single-step co-precipitation method for the fabrication of magnetic cellulose n...
“The final publication is available at Springer via http://dx.doi.org/10.1007/s10853-015-9409-y”.Ope...
Regenerated cellulose formed into cellulose nanofibers under strong magnetic field and aligned perpe...
Orientation of cellulose nanowhiskers (CNWs) within various matrices is an effective approach that a...
ABSTRACT: This work presents the development of dry spun cellulose acetate (CA) fibers using cellulo...
This work presents the development of dry spun cellulose acetate (CA) fibers using cellulose nanocry...
The molecular deformation and crystal orientation of a range of next generation regenerated cellulos...
Electrospinning is a fiber production method that has gained a special attention due to the simple s...
AbstractThe molecular deformation and crystal orientation of a range of next generation regenerated ...
The design and production of anisotropic composites and nanocomposites has become increasingly relev...
Modern society's demand for biobased and sustainable materials is increasing annually. Environmental...
Thesis (Ph.D.), Materials Science and Engineering Program, Washington State UniversityIn this resear...