A novel zwitterionic polymer functionalized porous membrane adsorber was obtained by grafting poly(N,N-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine) (polySPE) to poly(ethylene terephthalate) (PET) track-etched membrane surface via surface-initiated atom transfer radical polymerization (SI-ATRP). The ATRP conditions were optimized, the thus established grafting was well-controlled, and the degree of grafting could be adjusted. Functionalized membranes with a degree of grafting of about 3.5 μg/cm<sup>2</sup> relative to the specific surface area showed almost zero values of zeta potential estimated from the trans-membrane streaming potential measurements. Typical “anti-polyelectrolyte” effect was observed for the polyS...
Poly(lactic acid) (PLA) hemodialiltration membranes were grafted by zwitterionic polymer to improve ...
A new kind of zwitterionic molecule, [3-(methacryloylamino)propyl]-dimethyl (3-sulfopropyl) ammonium...
Functional matrix membranes formed by blending hydrophilic polymers with polysulfone (PSF) can provi...
In this work, a polyamide membrane was first prepared via in situ introduction of a surface-initiate...
This work described the graft polymerization of a zwitterionic polymer, [3-(methacryloylamino)propyl...
There is a growing need for functionalization strategies aimed to improve performance of platforms f...
A simple two-step surface modification method of polyamide nanofiltration membrane, involving the ac...
Polymer brushes grafted from surfaces using controlled polymerization techniques, most notably surfa...
Porous adsorber membranes are promising materials for the removal of charged pollutants, such as hea...
Polymer brushes grafted from surfaces using controlled polymerization techniques, most notably surfa...
In this study, we demonstrate a highly antifouling thin-film composite (TFC) membrane by grafting a ...
Zwitterionic materials have been widely used to modify membrane surfaces to increase surface hydroph...
Surface modification by the in situ growth of polymer chains from surface-anchored initiators (the “...
Preparation of novel separation membranes can be done very efficiently with controlled surface funct...
The grafting of pH-responsive poly(acrylic acid) (PAA) brushes was carried out on the surface of a c...
Poly(lactic acid) (PLA) hemodialiltration membranes were grafted by zwitterionic polymer to improve ...
A new kind of zwitterionic molecule, [3-(methacryloylamino)propyl]-dimethyl (3-sulfopropyl) ammonium...
Functional matrix membranes formed by blending hydrophilic polymers with polysulfone (PSF) can provi...
In this work, a polyamide membrane was first prepared via in situ introduction of a surface-initiate...
This work described the graft polymerization of a zwitterionic polymer, [3-(methacryloylamino)propyl...
There is a growing need for functionalization strategies aimed to improve performance of platforms f...
A simple two-step surface modification method of polyamide nanofiltration membrane, involving the ac...
Polymer brushes grafted from surfaces using controlled polymerization techniques, most notably surfa...
Porous adsorber membranes are promising materials for the removal of charged pollutants, such as hea...
Polymer brushes grafted from surfaces using controlled polymerization techniques, most notably surfa...
In this study, we demonstrate a highly antifouling thin-film composite (TFC) membrane by grafting a ...
Zwitterionic materials have been widely used to modify membrane surfaces to increase surface hydroph...
Surface modification by the in situ growth of polymer chains from surface-anchored initiators (the “...
Preparation of novel separation membranes can be done very efficiently with controlled surface funct...
The grafting of pH-responsive poly(acrylic acid) (PAA) brushes was carried out on the surface of a c...
Poly(lactic acid) (PLA) hemodialiltration membranes were grafted by zwitterionic polymer to improve ...
A new kind of zwitterionic molecule, [3-(methacryloylamino)propyl]-dimethyl (3-sulfopropyl) ammonium...
Functional matrix membranes formed by blending hydrophilic polymers with polysulfone (PSF) can provi...