Add to ORKGCommercial purity aluminium has atomised, mixed with short, 3 micron 'Saffil' alumina fibres, ball milled, tumbled, cold compacted (20MPa) and then extruded. The fibres are well distributed and generally lie parallel to the extrusion direction (horizontal).
The results of investigations of properties of aluminium-based composites produced by means of powd...
Meta1 matrix composites based on an aluminium alloys were produced by powder metallurgy route, invol...
By applying cold extrusion, an elemental metal powder composite Al60Mg40 was prepared. The texture g...
Commercial purity aluminium has atomised, mixed with short, 3 micron 'Saffil' alumina fibres, ball m...
Commercial purity aluminium has atomised, mixed with 13 micron spherical alumina particles, ball mil...
An Al-5SiO2 (5 wt% of SiO2) aluminium matrix fiber composite was produced where the reinforcement co...
Summary Saffil short fibre agglomerates with diameters of 0.4 mm to 1 mm have been prepared using a ...
The section is transverse to the fibre plane. A preform of short fibres has been infiltrated with th...
In this study, mechanical properties and microstructures of extruded aluminum matrix composites were...
Unidirectional short carbon fiber/aluminum matrix composites have been prepared by hot extrusion of ...
The ability to tailor specific properties, such as stiffness, hardness and thermal expansion has led...
Aluminium-base matrix composites with ceramic reinforcements combine the high ductility and toughnes...
The manufacturing of innovative lightweight materials and their further processing by forming allows...
The influence of secondary processing conditions on an aluminium metal matrix composite, comprising ...
Equal channel angular extrusion (ECAE) was employed in an attempt to develop nanostructural metal ma...
The results of investigations of properties of aluminium-based composites produced by means of powd...
Meta1 matrix composites based on an aluminium alloys were produced by powder metallurgy route, invol...
By applying cold extrusion, an elemental metal powder composite Al60Mg40 was prepared. The texture g...
Commercial purity aluminium has atomised, mixed with short, 3 micron 'Saffil' alumina fibres, ball m...
Commercial purity aluminium has atomised, mixed with 13 micron spherical alumina particles, ball mil...
An Al-5SiO2 (5 wt% of SiO2) aluminium matrix fiber composite was produced where the reinforcement co...
Summary Saffil short fibre agglomerates with diameters of 0.4 mm to 1 mm have been prepared using a ...
The section is transverse to the fibre plane. A preform of short fibres has been infiltrated with th...
In this study, mechanical properties and microstructures of extruded aluminum matrix composites were...
Unidirectional short carbon fiber/aluminum matrix composites have been prepared by hot extrusion of ...
The ability to tailor specific properties, such as stiffness, hardness and thermal expansion has led...
Aluminium-base matrix composites with ceramic reinforcements combine the high ductility and toughnes...
The manufacturing of innovative lightweight materials and their further processing by forming allows...
The influence of secondary processing conditions on an aluminium metal matrix composite, comprising ...
Equal channel angular extrusion (ECAE) was employed in an attempt to develop nanostructural metal ma...
The results of investigations of properties of aluminium-based composites produced by means of powd...
Meta1 matrix composites based on an aluminium alloys were produced by powder metallurgy route, invol...
By applying cold extrusion, an elemental metal powder composite Al60Mg40 was prepared. The texture g...