Hydrate-Based Desalination Using Cyclopentane Hydrates at Atmospheric Pressure

The use of a hydrate-based technology in seawater desalination is an interesting potential hydrate application since salt ions would be excluded from the hydrate crystal lattice. In order to better understand the hydrate-based desalination process, experiments have been conducted using cyclopentane (CyC5, sII) hydrates, which can be formed at atmospheric pressure and temperatures below 7.7 °C. The hydrate formation experiments were performed at various subcoolings for aqueous solutions with different salinities in a bubble column. The hydrate formation times decreased and the hydrate conversion increased with increasing subcooling and agitation. Various hydrate-former injection methods were studied, with the most effective method involving spraying finely dispersed CyC5 droplets (around 5 μm in diameter) into the water-filled bubble column. The latter method resulted in a 2-fold increase in seawater conversion to hydrate crystals compared with injecting millimeter-scale CyC5 droplets. A desalination efficiency of 81% (the salinity decreased from 3.5 to 0.67 wt %) was achieved by using a three-step separation method, including gravitational separation, filtration, and a washing step. Washing the hydrate sample using filtered water decreased the salinity from 1.5 wt % in the solid hydrates before washing to 1.05 wt % after washing