Critical evaluation, thermodynamic modeling and optimization of the Cu-Fe-O system are presented. The model for the liquid phase is developed within the framework of the Quasichemical Formalism. It describes liquid over the whole composition range from metal alloy to oxide melt. The model for spinel is developed within the framework of the Compound Energy Formalism. The spinel solution expands from magnetite, FeO, to cupric ferrite, CuFeO. A small solubility of copper in wüstite is described by a simple Bragg-Williams model. Parameters of thermodynamic models have been optimized to reproduce all available thermodynamic and phase equilibrium data within experimental error limits. The thermodynamic optimization of the Cu-Fe-O system performed...
Very little work has been done on the measurement of thermodynamic properties of oxygen in low-iron ...
Calcium ferrite slags described by the Cu-Ca-Fe-O system are used in continuous copper-converting pr...
Calcium ferrite slags, used in continuous copper-converting processes can be described by the "Cu2O"...
The present study is the first Calphad-type assessment of the Cu–Fe–O–Si system. All relevant thermo...
The previously obtained thermodynamic databases for the Cu–Fe–S, Cu–Fe–O, Fe–O–S and Cu–O–S ternary ...
Thermodynamic assessment of the CaO–CuO–FeO–FeO system is presented. Effects of temperature and P(O)...
The present thesis gives a summary of results obtained through theoretical and experimental studies ...
Phase equilibrium and thermodynamic experimental data in the Cu 2O - SiO2, Cu2O - CaO, and Cu2O - Ca...
The Fe-O system has been assessed over the whole composition range to produce a self-consistent set ...
Copper smelting and converting takes place over a wide range of chemistries and process conditions. ...
Iron-silicate slag is of primary importance to various metallurgical processes, in particular to cop...
A review of the structural and thermodynamic information and phase equilibria in the Cu-Fe-O system ...
Calcium ferrite slags, which are represented by the "Cu O"-FeO-FeO-CaO system at copper saturation, ...
A complete literature review, critical evaluation, and thermodynamic modeling of the phase diagrams ...
A review of the structural and thermodynamic information and phase equilibria in the Cu-Fe-O system ...
Very little work has been done on the measurement of thermodynamic properties of oxygen in low-iron ...
Calcium ferrite slags described by the Cu-Ca-Fe-O system are used in continuous copper-converting pr...
Calcium ferrite slags, used in continuous copper-converting processes can be described by the "Cu2O"...
The present study is the first Calphad-type assessment of the Cu–Fe–O–Si system. All relevant thermo...
The previously obtained thermodynamic databases for the Cu–Fe–S, Cu–Fe–O, Fe–O–S and Cu–O–S ternary ...
Thermodynamic assessment of the CaO–CuO–FeO–FeO system is presented. Effects of temperature and P(O)...
The present thesis gives a summary of results obtained through theoretical and experimental studies ...
Phase equilibrium and thermodynamic experimental data in the Cu 2O - SiO2, Cu2O - CaO, and Cu2O - Ca...
The Fe-O system has been assessed over the whole composition range to produce a self-consistent set ...
Copper smelting and converting takes place over a wide range of chemistries and process conditions. ...
Iron-silicate slag is of primary importance to various metallurgical processes, in particular to cop...
A review of the structural and thermodynamic information and phase equilibria in the Cu-Fe-O system ...
Calcium ferrite slags, which are represented by the "Cu O"-FeO-FeO-CaO system at copper saturation, ...
A complete literature review, critical evaluation, and thermodynamic modeling of the phase diagrams ...
A review of the structural and thermodynamic information and phase equilibria in the Cu-Fe-O system ...
Very little work has been done on the measurement of thermodynamic properties of oxygen in low-iron ...
Calcium ferrite slags described by the Cu-Ca-Fe-O system are used in continuous copper-converting pr...
Calcium ferrite slags, used in continuous copper-converting processes can be described by the "Cu2O"...