Add to ORKGSuperhydrophobic nanocomposite coatings were fabricated by incorporating hydrophobically modified silica (HMS) nanoparticles in polytetrafluoroethylene (PTFE) emulsion. Hydrophobicity of the coating was dependent on the concentration of HMS. Coatings containing optimum amounts of PTFE and HMS exhibited superhydrophobic property with high water contact angle (WCA) of 165◦ and low sliding angle <2◦. Scanning electron microscopic (SEM) studies have shown a binary surface topography composed of microbumps and nanoscale granules. The synergistic effect of the micro-nano-binary structure and low surface energy of PTFE was responsible for the superhydrophobicity of the coating. The method is simple and cost-effective and can be\ud used for prepari...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...
A superhydrophobic surface was obtained by embedding hydrophobically modified fumed silica (HMFS) p...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...
Stable superhydrophobic surfaces with water contact angles over 170 degrees and sliding angles below...
A solid surface is described as superhydrophobic when it possesses a large water contact angle (θw ≥...
A solid surface is described as superhydrophobic when it possesses a large water contact angle (θw ≥...
The dirt particles are detached and carried away by freely rolling water drops from superhydrophobic...
© 2011 Dr. Kwun Lun ChoUltrarough surfaces with variable architecture were synthesised and examined ...
AbstractSuperhydrophobic nanocomposite coatings on injection-molded polypropylene (PP) samples were ...
Although there are many viable approaches to induce hydrophobicity, a superhydrophobic surface could...
Although there are many viable approaches to induce hydrophobicity, a superhydrophobic surface could...
We herein report a simple and effective method to fabricate excellent transparent superhydrophobic c...
Coatings prepared from a suspension of fluoroalkyl-silane modified silica nanoparticles (FNPs) in a ...
We present recent work on a method for depositing silicone nanofilament coatings on surfaces under m...
A superhydrophobic surface was obtained by embedding hydrophobically modified fumed silica (HMFS)\ud...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...
A superhydrophobic surface was obtained by embedding hydrophobically modified fumed silica (HMFS) p...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...
Stable superhydrophobic surfaces with water contact angles over 170 degrees and sliding angles below...
A solid surface is described as superhydrophobic when it possesses a large water contact angle (θw ≥...
A solid surface is described as superhydrophobic when it possesses a large water contact angle (θw ≥...
The dirt particles are detached and carried away by freely rolling water drops from superhydrophobic...
© 2011 Dr. Kwun Lun ChoUltrarough surfaces with variable architecture were synthesised and examined ...
AbstractSuperhydrophobic nanocomposite coatings on injection-molded polypropylene (PP) samples were ...
Although there are many viable approaches to induce hydrophobicity, a superhydrophobic surface could...
Although there are many viable approaches to induce hydrophobicity, a superhydrophobic surface could...
We herein report a simple and effective method to fabricate excellent transparent superhydrophobic c...
Coatings prepared from a suspension of fluoroalkyl-silane modified silica nanoparticles (FNPs) in a ...
We present recent work on a method for depositing silicone nanofilament coatings on surfaces under m...
A superhydrophobic surface was obtained by embedding hydrophobically modified fumed silica (HMFS)\ud...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...
A superhydrophobic surface was obtained by embedding hydrophobically modified fumed silica (HMFS) p...
Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobic...