Scaling effects of a novel solar receiver for a micro gas-turbine based solar dish system

Laboratory-scale component testing in dedicated high-flux solar simulators is a crucial step in the developmentand scale-up of concentrating solar power plants. Due to different radiative boundary conditions available inhigh-flux solar simulators and full-scale power plants the temperature and stress profiles inside the investigatedreceivers differ between these two testing platforms. The main objective of this work is to present a systematicscaling methodology for solar receivers to guarantee that experiments performed in the controlled environmentof high-flux solar simulators yield representative results when compared to full-scale tests. In this work theeffects of scaling a solar air receiver from the integration into the OMSoP full-scale micro gas-turbine based solardish system to the KTH high-flux solar simulator are investigated. Therefore, Monte Carlo ray-tracing routines ofthe solar dish concentrator and the solar simulator are developed and validated against experimental characterizationresults. The thermo-mechanical analysis of the solar receiver is based around a coupled CFD/FEManalysislinked with stochastic heat source calculations in combination with ray-tracing routines. A geneticmulti-objective optimization is performed to identify suitable receiver configurations for testing in the solarsimulator which yield representative results compared to full-scale tests. The scaling quality is evaluated using aset of performance and scaling indicators. Based on the results a suitable receiver configuration is selected forfurther investigation and experimental evaluation in the KTH high-flux solar simulator.QC 20180226