Blends of nylon-6 and epoxidised ethylene propylene diene (eEPDM) rubber were prepared through reactive mixing. It is found that the toughness of nylon-6 can be much improved by this method, and that the particle size of eEPDM is much smaller than that of unexpoxidised EPDM (uEPDM) rubber in a nylon-6 matrix. This indicates that the epoxy group in eEPDM could react with a nylon-6 end group to form a graft copolymer which could act as an interfacial compatibiliser between the nylon-6 and the eEPDM rubber dispersed phase. (C) 1998 Elsevier Science Ltd. All rights reserved
The influence of the functional groups concentrations on the reactive compatibilization of polybutyl...
Blends of 90 wt% nylon-6 and 10 wt% EPDM (ethylene propylene diene monomer) rubber were prepared. Th...
Polyamide 6 (PA) and ethylene-propylene rubber with maleic functionality (EPMA) were blended in a ba...
In this paper, unepoxidized ethylene propylene diene rubber (uEPDM) was first epoxidized with formic...
The mechanical properties and phase morphology of ternary blends of nylon 6 with rubber, e.g., malea...
In this article, ethylene-propylene-diene-rubber (EPDM) was epoxidized with an in situ formed perfor...
Binary and ternary blends of nylon-6/low density polyethylene (nylon-6/LDPE) and Nylon-6/LDPE/poly(e...
The deformation and fracture behaviour of nylon-6/EPR (ethylene-propylene rubber) blends is studied ...
Blends of nylon-6 and EPDM-rubber were prepared with various rubber contents (0–20 wt%) and particle...
Blends of 90wt% nylon-6 and 10wt% impact modifier were prepared. As impact modifiers were used: EPDM...
Blends containing recycled EPDM rubber and thermoplastics, EMA and LDPE were studied. Two compatib...
textRubber toughening of an amorphous polyamide (Zytel 330 from DuPont), a-PA, using various maleate...
The toughening of an aromatic amine-cured diglycidyl ether of bisphenoI-A epoxy with particles of cr...
A new carboxylated styrene-butadiene rubber (CSBR) in ultrafine powder form was used to modify the p...
The toughening of an aromatic amine-cured diglycidyl ether of bisphenol-A epoxy with particles of cr...
The influence of the functional groups concentrations on the reactive compatibilization of polybutyl...
Blends of 90 wt% nylon-6 and 10 wt% EPDM (ethylene propylene diene monomer) rubber were prepared. Th...
Polyamide 6 (PA) and ethylene-propylene rubber with maleic functionality (EPMA) were blended in a ba...
In this paper, unepoxidized ethylene propylene diene rubber (uEPDM) was first epoxidized with formic...
The mechanical properties and phase morphology of ternary blends of nylon 6 with rubber, e.g., malea...
In this article, ethylene-propylene-diene-rubber (EPDM) was epoxidized with an in situ formed perfor...
Binary and ternary blends of nylon-6/low density polyethylene (nylon-6/LDPE) and Nylon-6/LDPE/poly(e...
The deformation and fracture behaviour of nylon-6/EPR (ethylene-propylene rubber) blends is studied ...
Blends of nylon-6 and EPDM-rubber were prepared with various rubber contents (0–20 wt%) and particle...
Blends of 90wt% nylon-6 and 10wt% impact modifier were prepared. As impact modifiers were used: EPDM...
Blends containing recycled EPDM rubber and thermoplastics, EMA and LDPE were studied. Two compatib...
textRubber toughening of an amorphous polyamide (Zytel 330 from DuPont), a-PA, using various maleate...
The toughening of an aromatic amine-cured diglycidyl ether of bisphenoI-A epoxy with particles of cr...
A new carboxylated styrene-butadiene rubber (CSBR) in ultrafine powder form was used to modify the p...
The toughening of an aromatic amine-cured diglycidyl ether of bisphenol-A epoxy with particles of cr...
The influence of the functional groups concentrations on the reactive compatibilization of polybutyl...
Blends of 90 wt% nylon-6 and 10 wt% EPDM (ethylene propylene diene monomer) rubber were prepared. Th...
Polyamide 6 (PA) and ethylene-propylene rubber with maleic functionality (EPMA) were blended in a ba...