Blends consisting of high-impact polystyrene (HIPS) as the matrix and polyamide 1010 (PA1010) as the dispersed phase were prepared by mixing. The grafting copolymers of HIPS and maleic anhydride (MA), the compatibilizer precursors of the blends, were synthesized. The contents of the IMA in the grafting copolymers are 4.7 wt % and 1.6 wt %, and were assigned as HAM and LMA, respectively. Different blend morphologies were observed by scanning electron microscopy (SEM); the domain size of the PA1010 dispersed phase in the HIPS matrix of compatibilized blends decreased comparing with that of uncompatibilized blends. For the blend with 25 wt % HIPS-g-MA component, the T-c of PA1010 shifts towards lower temperature, from 178 to 83 degrees C. It i...
A functionalized high-density polyethylene (HDPE) with maleic anhydride (MAH) was prepared using a r...
A functionalized ultrahigh molecular weight polyethylene (UHMWPE) was prepared using suspension graf...
Compatibilized blends of polypropylene (PP) and polyamide-12 (PA12) as a second component were obtai...
The effect of the content of a copolymer consisting of high impact polystyrene grafted with maleic a...
The binary blends of polyamide 1010 (PA1010) with the high-impact polystyrene (HIPS)/maleic anhydrid...
The crystallization behaviors, dynamic mechanical properties, tensile, and morphology features of po...
The crystallization, dynamic mechanical properties, tensile properties and morphology features of po...
The graft copolymer of high impact polystyrene (HIPS) grafted with malice anhydride (MA) (HIPS-g-MA)...
Polystyrene (PS) blends containing a dispersed phase of either polyamide-6 (PA-6) or polyamide-12 (P...
The modification of ethylene-propylene copolymer (EP) has been accomplished by radical EP-graft-acry...
The study deals with the effectiveness of maleic anhydride grafted styrene-b-ethylene-co-propylene c...
Several polypropylene-polystyrene blends were made using polypropylene-maleic anhydride graft (PP-MA...
The morphology of immiscible and highly incompatible blends of Sorona(R) polymer Poly(trimethylene t...
The modification of high-impact polystyrene (HIPS) was accomplished by melt-grafting glycidyl methac...
One of the main trends in the polymer industry today is the increasing importance of polymer blends....
A functionalized high-density polyethylene (HDPE) with maleic anhydride (MAH) was prepared using a r...
A functionalized ultrahigh molecular weight polyethylene (UHMWPE) was prepared using suspension graf...
Compatibilized blends of polypropylene (PP) and polyamide-12 (PA12) as a second component were obtai...
The effect of the content of a copolymer consisting of high impact polystyrene grafted with maleic a...
The binary blends of polyamide 1010 (PA1010) with the high-impact polystyrene (HIPS)/maleic anhydrid...
The crystallization behaviors, dynamic mechanical properties, tensile, and morphology features of po...
The crystallization, dynamic mechanical properties, tensile properties and morphology features of po...
The graft copolymer of high impact polystyrene (HIPS) grafted with malice anhydride (MA) (HIPS-g-MA)...
Polystyrene (PS) blends containing a dispersed phase of either polyamide-6 (PA-6) or polyamide-12 (P...
The modification of ethylene-propylene copolymer (EP) has been accomplished by radical EP-graft-acry...
The study deals with the effectiveness of maleic anhydride grafted styrene-b-ethylene-co-propylene c...
Several polypropylene-polystyrene blends were made using polypropylene-maleic anhydride graft (PP-MA...
The morphology of immiscible and highly incompatible blends of Sorona(R) polymer Poly(trimethylene t...
The modification of high-impact polystyrene (HIPS) was accomplished by melt-grafting glycidyl methac...
One of the main trends in the polymer industry today is the increasing importance of polymer blends....
A functionalized high-density polyethylene (HDPE) with maleic anhydride (MAH) was prepared using a r...
A functionalized ultrahigh molecular weight polyethylene (UHMWPE) was prepared using suspension graf...
Compatibilized blends of polypropylene (PP) and polyamide-12 (PA12) as a second component were obtai...