ATI 718Plus components are manufactured by forging a wrought billet in stages to obtain the desired geometry and microstructure. Parts are then heat treated to optimized proportions of γ’ and η phases. η phase is a plate-like phase that precipitates on the grain boundaries of ATI 718Plus, similar to δ phase in Inconel 718. However, the complete kinetic behaviour of η phase precipitation during forging and heat treatment is still not fully understood. This paper investigates the effects of strain hardening on η phase precipitation kinetics in ATI 718Plus. This is achieved through the use of isothermal hot compression tests and heat treatment. Strain hardening was found to affect the η precipitation kinetics considerably. The results reported...
Significant research has been directed towards characterising the precipitation and dissolution kine...
Les superalliages base nickel possèdent d'exceptionelles propriétés mécaniques et de résistance à la...
In order to investigate the influence of δ-phase precipitation during high temperature forging of In...
ATI 718Plus components are heat treated to optimised proportions of γ’ and η phases. η phase is util...
© 2016 ASM International Inconel 718 presents excellent mechanical properties at high temperatures, ...
Grain boundary precipitates in Inconel 718 and ATI 718Plus are important to control during hot worki...
Since its introduction in 2003, alloy 718PlusTM spurred a lot of interest owing to its increased max...
Abstract: High-temperature compression tests were performed on a Ni-base superalloy with a multi-pha...
The hot ductility of cast ATI\uae 718Plus\uae was assessed using the Gleeble thermo-mechanical simul...
A systematic study of the effect of δ phase precipitate morphology on the hot deformation behavior a...
Nickel-base superalloys are widely applied in the hot section of aero engines due to their high temp...
The negative influence of δ phase on the intergranular stress corrosion cracking (IGSCC) resistance ...
Abstract:Inconel ® 718 is a well-known nickel-based super-alloy used for high-temperature applicatio...
In this study, the effect of the surface state on the behaviour of Inconel 718 alloy exposed to 640 ...
High-temperature compression tests were performed on a Ni-base superalloy with a multi-phase microst...
Significant research has been directed towards characterising the precipitation and dissolution kine...
Les superalliages base nickel possèdent d'exceptionelles propriétés mécaniques et de résistance à la...
In order to investigate the influence of δ-phase precipitation during high temperature forging of In...
ATI 718Plus components are heat treated to optimised proportions of γ’ and η phases. η phase is util...
© 2016 ASM International Inconel 718 presents excellent mechanical properties at high temperatures, ...
Grain boundary precipitates in Inconel 718 and ATI 718Plus are important to control during hot worki...
Since its introduction in 2003, alloy 718PlusTM spurred a lot of interest owing to its increased max...
Abstract: High-temperature compression tests were performed on a Ni-base superalloy with a multi-pha...
The hot ductility of cast ATI\uae 718Plus\uae was assessed using the Gleeble thermo-mechanical simul...
A systematic study of the effect of δ phase precipitate morphology on the hot deformation behavior a...
Nickel-base superalloys are widely applied in the hot section of aero engines due to their high temp...
The negative influence of δ phase on the intergranular stress corrosion cracking (IGSCC) resistance ...
Abstract:Inconel ® 718 is a well-known nickel-based super-alloy used for high-temperature applicatio...
In this study, the effect of the surface state on the behaviour of Inconel 718 alloy exposed to 640 ...
High-temperature compression tests were performed on a Ni-base superalloy with a multi-phase microst...
Significant research has been directed towards characterising the precipitation and dissolution kine...
Les superalliages base nickel possèdent d'exceptionelles propriétés mécaniques et de résistance à la...
In order to investigate the influence of δ-phase precipitation during high temperature forging of In...