It was found that partially recrystallized microstructure evolved under the hot rolling resulting in slight anisotropy of superplastic behavior. Microstructure evolution and cavitation during superplastic deformation were examinedyesBelgorod State Universit
The boundary misorientations in an Al-1OMg-O.1Zr (wt%) alloy, thermomechanically processed by rollin...
The large elongations associated with superplasticity are observed only in materials with fine grain...
Aluminium alloys can be thermomechanically processed to develop the grain fine microstructures requi...
yesIt was found that partially recrystallized microstructure evolved under the hot rolling resulting...
yesThe microstructural evolution during superplastic deformation of the Al-Li-Cu-Mg alloy has been s...
A specific objective of this work is to examine the microstructural evolution, cavitation, and fract...
Microstructural evolution and cavitation behavior of the 5083 alloy during superplastic deformationy...
A novel commercial Al-Li-Mg-Cu-Sc alloy was fabricated by casting and subjected to intense plastic d...
It was shown that the ECAE processed 1421 Al exhibits superplastic properties in the temperature ran...
The effect of superplastic deformation on the microstructure and post-form tensile and fatigue prope...
The superplastic properties of a cold-rolled Al±6Mg±0.3Sc alloy were studied at temperatures between...
We have characterized in the Al-Mg system the microstructure and mechanical properties of a cold-rol...
An Al---Cu---Li---Zr alloy processed to recrystallize statically exhibits superplastic characteristi...
The SPF grade.sheets of AA8090 Al-Li alloy were observed to possess a composite-like layered microst...
The microstructural evolution during superplastic deformation of the 6061 alloy has been studied qua...
The boundary misorientations in an Al-1OMg-O.1Zr (wt%) alloy, thermomechanically processed by rollin...
The large elongations associated with superplasticity are observed only in materials with fine grain...
Aluminium alloys can be thermomechanically processed to develop the grain fine microstructures requi...
yesIt was found that partially recrystallized microstructure evolved under the hot rolling resulting...
yesThe microstructural evolution during superplastic deformation of the Al-Li-Cu-Mg alloy has been s...
A specific objective of this work is to examine the microstructural evolution, cavitation, and fract...
Microstructural evolution and cavitation behavior of the 5083 alloy during superplastic deformationy...
A novel commercial Al-Li-Mg-Cu-Sc alloy was fabricated by casting and subjected to intense plastic d...
It was shown that the ECAE processed 1421 Al exhibits superplastic properties in the temperature ran...
The effect of superplastic deformation on the microstructure and post-form tensile and fatigue prope...
The superplastic properties of a cold-rolled Al±6Mg±0.3Sc alloy were studied at temperatures between...
We have characterized in the Al-Mg system the microstructure and mechanical properties of a cold-rol...
An Al---Cu---Li---Zr alloy processed to recrystallize statically exhibits superplastic characteristi...
The SPF grade.sheets of AA8090 Al-Li alloy were observed to possess a composite-like layered microst...
The microstructural evolution during superplastic deformation of the 6061 alloy has been studied qua...
The boundary misorientations in an Al-1OMg-O.1Zr (wt%) alloy, thermomechanically processed by rollin...
The large elongations associated with superplasticity are observed only in materials with fine grain...
Aluminium alloys can be thermomechanically processed to develop the grain fine microstructures requi...
DOI
Add to ORKG