The structural changes are characterized by the development of deformation or microshear bands in coarse-grain interiors, followed by homogeneous evolution of new grains at high strains. The mechanism of fine grain production and the factors controlling grain refinement during hot multidirectional deformation are discussed in detailyesBelgorod State Universit
Grain refinement taking place in a commercial 7055 aluminum alloy under equal channel angular extrus...
Using the CAST hot tearing rig, grain refinement was found to delay the onset of strength developmen...
The effect of isothermal multidirectional forging (IMF) on the microstructure evolution of a convent...
yesThe structural changes are characterized by the development of deformation or microshear bands in...
yesStrain-induced grain refinement in a coarse-grained 7475 Al alloy was studied by means of multidi...
The grain refinement mechanisms operating under hot MAC are discussed in some detailsyesBelgorod Sta...
yesThe main aim of the present work was to study effect of applied strain rate on fine-grained struc...
The misorientation angle distribution for newly developed boundaries shows a single peak type at rel...
Grain refinement in an as-cast 0.16%Zr modified 7475 aluminum alloy was studied by means of compress...
It was shown that extensive grain refinement takes place in an as-cast Al-5.4%Mg-0.5%Mn-0.1%Zr alloy...
It was shown that extensive grain refinement takes place in an as-cast Al-5.4%Mg-0.5%Mn-0.1%Zr alloy...
International audienceControlling the grain size of recrystallized grains during hot rolling is cruc...
SA508Gr.3 steel is popularly used to produce core unit of nuclear power reactors due to its outstand...
In the present study, the coarsening mechanism of equiaxed grains in the semisolid state of aluminum...
This paper reports on a study of the stress-induced grain growth phenomenon in the presence of secon...
Grain refinement taking place in a commercial 7055 aluminum alloy under equal channel angular extrus...
Using the CAST hot tearing rig, grain refinement was found to delay the onset of strength developmen...
The effect of isothermal multidirectional forging (IMF) on the microstructure evolution of a convent...
yesThe structural changes are characterized by the development of deformation or microshear bands in...
yesStrain-induced grain refinement in a coarse-grained 7475 Al alloy was studied by means of multidi...
The grain refinement mechanisms operating under hot MAC are discussed in some detailsyesBelgorod Sta...
yesThe main aim of the present work was to study effect of applied strain rate on fine-grained struc...
The misorientation angle distribution for newly developed boundaries shows a single peak type at rel...
Grain refinement in an as-cast 0.16%Zr modified 7475 aluminum alloy was studied by means of compress...
It was shown that extensive grain refinement takes place in an as-cast Al-5.4%Mg-0.5%Mn-0.1%Zr alloy...
It was shown that extensive grain refinement takes place in an as-cast Al-5.4%Mg-0.5%Mn-0.1%Zr alloy...
International audienceControlling the grain size of recrystallized grains during hot rolling is cruc...
SA508Gr.3 steel is popularly used to produce core unit of nuclear power reactors due to its outstand...
In the present study, the coarsening mechanism of equiaxed grains in the semisolid state of aluminum...
This paper reports on a study of the stress-induced grain growth phenomenon in the presence of secon...
Grain refinement taking place in a commercial 7055 aluminum alloy under equal channel angular extrus...
Using the CAST hot tearing rig, grain refinement was found to delay the onset of strength developmen...
The effect of isothermal multidirectional forging (IMF) on the microstructure evolution of a convent...