The hot deformation behaviors of the aluminium alloy PM2014 and metal matrix composite PM2014-20% Al₂O₃p, produced via powder metallurgy, have been compared by tension tests in the range of temperatures and strain rates of T=450-525°C and ε=10⁻¹⁴-1.1 s⁻¹ respectivelyyesBelgorod State Universit
This thesis explores the thermomechanical behavior of aluminum. Experimental work has been conducted...
The hot tensile deformation behaviour of the 6061/Al2O3, 2618/Al2O3 and 2618/SiC particulate reinfor...
This research focused on studying the effect of temperature on the mechanical properties of alumini...
yesThe hot deformation behaviors of the aluminium alloy PM2014 and metal matrix composite PM2014-20%...
Aims to determine the hot working behavior of two alumina particle reinforced aluminum-matrix compos...
yesThe deformation behavior of a 0.2% Zr and 1.6% Mn modified 5083 aluminum alloy was studied in the...
An investigation is presented on hot deformation behaviour under tensile conditions of Al 6061/20%Al...
An investigation is presented on hot deformation behaviour under tensile conditions of Al 6061/20%Al...
The mechanical properties of 2024 aluminum alloy were studied after two different tempers. The T351 ...
yesThe deformation behavior of a 2219 aluminum alloy was studied in the temperature range from 250 t...
The development of conventional direct casting techniques to produce aluminium alloy based metal mat...
The response of two different types of aluminium matrix composites (AMCs) reinforced with silicon ca...
Tensile tests of 8009Al alloy reinforced with SiC and Al₂O₃ particles fabricated by powder metallurg...
Aluminum metal-matrix composites (MMCs) are well positioned to replace steel in numerous manufacture...
Experimental study was conducted to assess the consequence of titanium carbide (TiC), molybdenum ca...
This thesis explores the thermomechanical behavior of aluminum. Experimental work has been conducted...
The hot tensile deformation behaviour of the 6061/Al2O3, 2618/Al2O3 and 2618/SiC particulate reinfor...
This research focused on studying the effect of temperature on the mechanical properties of alumini...
yesThe hot deformation behaviors of the aluminium alloy PM2014 and metal matrix composite PM2014-20%...
Aims to determine the hot working behavior of two alumina particle reinforced aluminum-matrix compos...
yesThe deformation behavior of a 0.2% Zr and 1.6% Mn modified 5083 aluminum alloy was studied in the...
An investigation is presented on hot deformation behaviour under tensile conditions of Al 6061/20%Al...
An investigation is presented on hot deformation behaviour under tensile conditions of Al 6061/20%Al...
The mechanical properties of 2024 aluminum alloy were studied after two different tempers. The T351 ...
yesThe deformation behavior of a 2219 aluminum alloy was studied in the temperature range from 250 t...
The development of conventional direct casting techniques to produce aluminium alloy based metal mat...
The response of two different types of aluminium matrix composites (AMCs) reinforced with silicon ca...
Tensile tests of 8009Al alloy reinforced with SiC and Al₂O₃ particles fabricated by powder metallurg...
Aluminum metal-matrix composites (MMCs) are well positioned to replace steel in numerous manufacture...
Experimental study was conducted to assess the consequence of titanium carbide (TiC), molybdenum ca...
This thesis explores the thermomechanical behavior of aluminum. Experimental work has been conducted...
The hot tensile deformation behaviour of the 6061/Al2O3, 2618/Al2O3 and 2618/SiC particulate reinfor...
This research focused on studying the effect of temperature on the mechanical properties of alumini...