Ytterbium-doped microsphere lasers

This thesis covers the construction and characterisation of microlasers based on whispering gallery modes in ytterbium-doped microsphere resonators. The microlasers were made by drawing and fusing Yb-doped silica optical fibre into microspheres of approximately 100 μmin diameter using CO2 laser-induced melting. Access to whispering gallery modes was accomplished using a prism coupled to the evanescent field of the internal cavity modes. Microspheres with Q-factors of up to 10^7 were made using this technique. CW multimode lasing was observed at 1050 nm, with a pump threshold required for lasing estimated to be of the order of 100 μW for a 900 nm pump. Both TE and TM modes were identified in the laser emission and the ability to selectively excite each mode family (TE or TM) is shown to be directly controlled by the pump. Pulsed lasing was also observed at 975 nm and 1050 nm