<p>A) The front side shows the culture chambers that are arranged in a circle with a rotating loading stack in the centre; B) The medium reservoirs and the pump system are visible on the back side.</p
<p>(1) Anode chamber; (2) cathode chamber; (3) cloth separating the two chambers; (4) stainless-stee...
<p>Free fluid regions are visualized in grey, the porous medium is red (top). For the localization o...
<p>a: Schematic section of a culture well: cells are cultured on a Transwell<sup>®</sup> inserted in...
<p>(A) Representation of system set-up. Medium was pumped from the media carboy to the reactors by u...
<p>The scaffolds were press-fit into the column and the medium was pumped into the scaffolds via a p...
<p>(A) A diagram of the experimental set-up, and (B) brightfield and DAPI stained images of endothel...
<p><b>A.</b> Bioreactor including T-flask, substrate, voice-coil actuator, linear stepper motors, ro...
<p>Cross-section schematic of the mounted bioreactor with the endothelial cells culture on top of th...
(a) Uniaxial cyclic stretch bioreactor (b) Equiaxial cyclic stretch bioreactor (c) Shear stress bior...
<p>A, (1) the intelligent bionic culture setting; (2) the culture biochamber; (3) silicone tube; (4)...
<p>(1) air inlet; (2) air outlet; (3) fluid inlet; (4) fluid outlet; (5) the gas/liquid and liquid/l...
<p><b>A</b>, The bioreactor system consists of two subsystems: culture chamber and loading frame. Th...
<p>(a) A perfusion chamber for loading a scaffold, and (b) perfusion culture system.</p
<p>(a) Parts of the flow chamber used in this study. (b) Components of the system. The bubble trap w...
<p><b>A</b>, Schematic of the laboratory single-fibre HFB module. <b>B</b>, Schematic of model setup...
<p>(1) Anode chamber; (2) cathode chamber; (3) cloth separating the two chambers; (4) stainless-stee...
<p>Free fluid regions are visualized in grey, the porous medium is red (top). For the localization o...
<p>a: Schematic section of a culture well: cells are cultured on a Transwell<sup>®</sup> inserted in...
<p>(A) Representation of system set-up. Medium was pumped from the media carboy to the reactors by u...
<p>The scaffolds were press-fit into the column and the medium was pumped into the scaffolds via a p...
<p>(A) A diagram of the experimental set-up, and (B) brightfield and DAPI stained images of endothel...
<p><b>A.</b> Bioreactor including T-flask, substrate, voice-coil actuator, linear stepper motors, ro...
<p>Cross-section schematic of the mounted bioreactor with the endothelial cells culture on top of th...
(a) Uniaxial cyclic stretch bioreactor (b) Equiaxial cyclic stretch bioreactor (c) Shear stress bior...
<p>A, (1) the intelligent bionic culture setting; (2) the culture biochamber; (3) silicone tube; (4)...
<p>(1) air inlet; (2) air outlet; (3) fluid inlet; (4) fluid outlet; (5) the gas/liquid and liquid/l...
<p><b>A</b>, The bioreactor system consists of two subsystems: culture chamber and loading frame. Th...
<p>(a) A perfusion chamber for loading a scaffold, and (b) perfusion culture system.</p
<p>(a) Parts of the flow chamber used in this study. (b) Components of the system. The bubble trap w...
<p><b>A</b>, Schematic of the laboratory single-fibre HFB module. <b>B</b>, Schematic of model setup...
<p>(1) Anode chamber; (2) cathode chamber; (3) cloth separating the two chambers; (4) stainless-stee...
<p>Free fluid regions are visualized in grey, the porous medium is red (top). For the localization o...
<p>a: Schematic section of a culture well: cells are cultured on a Transwell<sup>®</sup> inserted in...