<p>Fig 6A: Comparison of experimental data with simulated output from solution kinetics model. Fig 6B: Simulated dynamics of ferrous iron and apo-Tf. With Cp, oxidation of ferrous iron as well as consumption of apo-Tf is faster.</p
<p>150 mL of FeSO<sub>4</sub>·7H<sub>2</sub>O solution with addition of ■: 1.80 mL of H<sub>2</sub>O...
<p>HFE knock-down (HH) simulations and WT simulation of Fe-Tf against ferroportin (Fpn) expression.<...
An important aspect of Process Simulators for photovoltaics is prediction of defect evolution during...
<p>Reactions when ferrous ion is added to a solution containing Cp and apo-Tf. Ferrous ion is oxidiz...
<p>Fig. 9A: Facilitated-transport model simulation of the different experimental release conditions ...
<p>Fig 10A: Simulation with facilitated-transport model quantifies the sensitivity of iron release t...
a. Mineralization rate over time as a function of iron APC. a series of simulations were run for whi...
To analyze the effect of substituting the model presented in this work with the FT representation of...
Pure iron has been oxidized at 600 \ub0C and 1 bar in dry O2 (oxygen partial pressure 0.05, bal. N2)...
<p>Fig 8A: Simulated ferrous iron flux using passive-gradient SD model for the four extracellular me...
<p>The Fe-Fur concentration was changed at zero time from 2000 nM to 1 nM (A and B) or from 1 nM to ...
Iron is essential for all known life due to its redox properties; however, these same properties can...
<p><b>A)</b> Initial iron absorption rates. <b>B)</b> Apical iron uptake after a 20 µM iron challeng...
Understanding the controls of the oxidation rate of iron (Fe) in oxygenated aquatic systems is funda...
This upload contains simulation and fitting data matching figures in the publication "Kinetic constr...
<p>150 mL of FeSO<sub>4</sub>·7H<sub>2</sub>O solution with addition of ■: 1.80 mL of H<sub>2</sub>O...
<p>HFE knock-down (HH) simulations and WT simulation of Fe-Tf against ferroportin (Fpn) expression.<...
An important aspect of Process Simulators for photovoltaics is prediction of defect evolution during...
<p>Reactions when ferrous ion is added to a solution containing Cp and apo-Tf. Ferrous ion is oxidiz...
<p>Fig. 9A: Facilitated-transport model simulation of the different experimental release conditions ...
<p>Fig 10A: Simulation with facilitated-transport model quantifies the sensitivity of iron release t...
a. Mineralization rate over time as a function of iron APC. a series of simulations were run for whi...
To analyze the effect of substituting the model presented in this work with the FT representation of...
Pure iron has been oxidized at 600 \ub0C and 1 bar in dry O2 (oxygen partial pressure 0.05, bal. N2)...
<p>Fig 8A: Simulated ferrous iron flux using passive-gradient SD model for the four extracellular me...
<p>The Fe-Fur concentration was changed at zero time from 2000 nM to 1 nM (A and B) or from 1 nM to ...
Iron is essential for all known life due to its redox properties; however, these same properties can...
<p><b>A)</b> Initial iron absorption rates. <b>B)</b> Apical iron uptake after a 20 µM iron challeng...
Understanding the controls of the oxidation rate of iron (Fe) in oxygenated aquatic systems is funda...
This upload contains simulation and fitting data matching figures in the publication "Kinetic constr...
<p>150 mL of FeSO<sub>4</sub>·7H<sub>2</sub>O solution with addition of ■: 1.80 mL of H<sub>2</sub>O...
<p>HFE knock-down (HH) simulations and WT simulation of Fe-Tf against ferroportin (Fpn) expression.<...
An important aspect of Process Simulators for photovoltaics is prediction of defect evolution during...
DOI
Add to ORKG