From Polymer Latexes to Multifunctional Liquid Marbles

A simple method to prepare multifunctional liquid marbles and dry water with magnetic, color, and fluorescent properties is presented. Multifunctional liquid marbles were prepared by encapsulation of water droplets using flocculated polymer latexes. First, the emulsion polymerization reaction of polystyrene and poly­(benzyl methacrylate) was carried out using cheap and commercially available cationic surfactants. Subsequently, flocculation of the latex was provoked by an anion-exchange reaction of the cationic surfactant by the addition of lithium bis­(trifluoromethanesulfonyl)­imide salt. The flocculated polymer latex was filtered and dried, leading to very hydrophobic micronanoparticulated powders. These powders showed a great ability to stabilize the air/water interface. Stable liquid marbles were obtained by rolling water droplets onto the hydrophobic powders previously prepared. The use of very small polystyrene nanoparticles led us to the preparation of very stable and the biggest known liquid marbles up to 2.5 mL of water. Furthermore, the introduction of fluorescent comonomer dyes into the polymer powders allowed us to obtain new morphological images and new knowledge about the structure of liquid marbles by confocal microscopy. Furthermore, the introduction of magnetic nanoparticles into the polymer latex led to magnetic responsive liquid marbles, where the iron oxide nanoparticles are protected within a polymer. Altogether this method represents an accessible and general platform for the preparation of multifunctional liquid marbles and dry water, which may contribute to extending of their actual range of applications