Preparation of Oil-in-Seawater Emulsions Based on Environmentally Benign Nanoparticles and Biosurfactant for Oil Spill Remediation

One remediation technique of oil spills is the application of dispersants to oil slicks, which is essentially a process of emulsification. Tetradecane and crude oil-in-seawater emulsions formed with silica nanoparticles modified <i>in situ</i> with rhamnolipid produced a longer stability and smaller droplet size. The interactions of silica particles with rhamnolipid were characterized by contact angle, interfacial tension, TEM, and SEM measurements. The images of confocal fluorescence microscopy and SEM showed the oil droplet microstructure and the morphology of nanoparticles at the oil droplet–water interface. The average emulsion droplet size and emulsion index were investigated. These results indicated a synergistic stabilization upon rhamnolipid addition. The synergy was even more efficient in the case of seawater with a high salinity. Here, because of the strong flocculation caused by high salinity, silica nanoparticles alone were not an effective emulsifier in seawater. The modification of silica nanoparticles by rhamnolipid changed the contact angle and promoted their adsorption at the oil–seawater interface, which provided an efficient barrier to droplet coalescence. The emulsification of rhamnolipid-modified silica nanoparticles worked well in crude oil–seawater system. So, this could be a new method to deal with the issue of the marine oil spill by environmentally benign silica particles and rhamnolipid