Composition of the C₆+ Fraction of Natural Gas by Multiple Porous Layer Open Tubular Capillaries Maintained at Low Temperatures

As the sources of natural gas become more diverse, the trace constituents of the C₆+ fraction are of increasing interest. Analysis of fuel gas (including natural gas) for compounds with more than six carbon atoms (the C₆+ fraction) has historically been complex and expensive. Hence, this is a procedure that is used most often in troubleshooting rather than for day-to-day operations. The C₆+ fraction affects gas quality issues and safety considerations, such as anomalies associated with odorization. Recent advances in dynamic headspace vapor collection can be applied to this analysis and provide a faster, less complex alternative for compositional determination of the C₆+ fraction of natural gas. Porous layer open tubular capillaries maintained at low temperatures (PLOT-cryo) form the basis of a dynamic headspace sampling method that was developed at the National Institute of Standards and Technology (NIST) initially for explosives in 2009. This method has been recently advanced by the combining of multiple PLOT capillary traps into one “bundle” or wafer, resulting in a device that allows for the rapid trapping of relatively large amounts of analyte. In this study, natural gas analytes were collected by flowing natural gas from the laboratory (gas out of the wall) or a prepared surrogate gas flowing through a chilled wafer. The analytes were then removed from the PLOT-cryo wafer by thermal desorption and subsequent flushing of the wafer with helium. Gas chromatography (GC) with mass spectrometry (MS) was then used to identify the analytes