<p>Biomechanical results of the 450-g brass weight-dropping from 1, 1.5, and 2 m.</p
Brass material which generally has low corrosion properties and low frictional forces is very suitab...
<p>Load-displacement curve from the biomechanical testing of a vertebra (ID: OPS004_1). FL was defin...
<p>Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-...
<p>Biomechanical analysis results regarding the average A) stiffness in N/mm and B) yield load in N....
The investigation is about the bearing load on a brass pin joined with Aluminium thin plates of vari...
<p>Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-...
Uniaxial tensile test data of brass sheet with thickness of 1.5 mm and grain sizes of 11, 25, 133 mi...
<p>Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).</p
This project was conducted to evaluate the variation of water content coupled with anatomical direct...
<p>Biomechanical performance of the injured treated and untreated bones on the 8<sup>th</sup> post-o...
This was the first phase of an investigation to determine the suitability of free-cutting brass coup...
<p>List of quantitative biomechanical parameters considered by this research; and related abbreviati...
3-point bending experiment for a brass beam. The dial measures the deflection as the load is increas...
The raw data of "Biomineralization and Osteogenic Differentiation Modulated by Substrate Stiffness"
<p>The stiffness values of bone specimens in the microwave-treated and control groups.</p
Brass material which generally has low corrosion properties and low frictional forces is very suitab...
<p>Load-displacement curve from the biomechanical testing of a vertebra (ID: OPS004_1). FL was defin...
<p>Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-...
<p>Biomechanical analysis results regarding the average A) stiffness in N/mm and B) yield load in N....
The investigation is about the bearing load on a brass pin joined with Aluminium thin plates of vari...
<p>Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-...
Uniaxial tensile test data of brass sheet with thickness of 1.5 mm and grain sizes of 11, 25, 133 mi...
<p>Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).</p
This project was conducted to evaluate the variation of water content coupled with anatomical direct...
<p>Biomechanical performance of the injured treated and untreated bones on the 8<sup>th</sup> post-o...
This was the first phase of an investigation to determine the suitability of free-cutting brass coup...
<p>List of quantitative biomechanical parameters considered by this research; and related abbreviati...
3-point bending experiment for a brass beam. The dial measures the deflection as the load is increas...
The raw data of "Biomineralization and Osteogenic Differentiation Modulated by Substrate Stiffness"
<p>The stiffness values of bone specimens in the microwave-treated and control groups.</p
Brass material which generally has low corrosion properties and low frictional forces is very suitab...
<p>Load-displacement curve from the biomechanical testing of a vertebra (ID: OPS004_1). FL was defin...
<p>Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-...
DOI
Add to ORKG