<p>Typical hysteresis curves of C2-C4 level of the four groups after fatigue test in the directions of flexion-extension (A), lateral bending (B), and rotation (C).</p
For each specimen, the load-displacment curves are plotted under the different testing conditions (f...
The strain-life approach is now commonly used for fatigue life analysis and predictions in the groun...
Axial-strain controlled low cycle fatigue tests were performed on several materials in different met...
<p>Typical hysteresis curves of C2-C4 level of the four groups before fatigue test in the directions...
<p>Ranges of motion profiles of the cervical segments of the four groups before the fatigue test in ...
The curve of the average relative stiffness of the cyclic test for each group and the first cycle se...
<p>Characteristic hysteresis curves of representative thoracic spinal motion segments of the upper, ...
<p>Torque-time curve in 4 conditions of test for extension and flexion at 180°.s<sup>−1</sup> in an ...
A torsional fatigue test was undertaken on S35C steel test pieces to find experimentally the relati...
<p>Average unidirectional ROM (A), NZ (B), and stiffness (C) of the four different groups at 24 week...
<p>Hysteresis ΔA (hatched area) was calculated as the difference between the areas under the extensi...
Special print from Scr. Metal. (1989). v. 23 p. 859-864SIGLECopy held by FIZ Karlsruhe; available fr...
Stress-strain curves obtained by performing 3 points bending tests. The bold curves correspond to th...
In this paper an energy criterion for fatigue failure is postulated. Micro-plastic strain hysteresis...
The strain-life approach is now commonly used for fatigue life analysis and predictions in the groun...
For each specimen, the load-displacment curves are plotted under the different testing conditions (f...
The strain-life approach is now commonly used for fatigue life analysis and predictions in the groun...
Axial-strain controlled low cycle fatigue tests were performed on several materials in different met...
<p>Typical hysteresis curves of C2-C4 level of the four groups before fatigue test in the directions...
<p>Ranges of motion profiles of the cervical segments of the four groups before the fatigue test in ...
The curve of the average relative stiffness of the cyclic test for each group and the first cycle se...
<p>Characteristic hysteresis curves of representative thoracic spinal motion segments of the upper, ...
<p>Torque-time curve in 4 conditions of test for extension and flexion at 180°.s<sup>−1</sup> in an ...
A torsional fatigue test was undertaken on S35C steel test pieces to find experimentally the relati...
<p>Average unidirectional ROM (A), NZ (B), and stiffness (C) of the four different groups at 24 week...
<p>Hysteresis ΔA (hatched area) was calculated as the difference between the areas under the extensi...
Special print from Scr. Metal. (1989). v. 23 p. 859-864SIGLECopy held by FIZ Karlsruhe; available fr...
Stress-strain curves obtained by performing 3 points bending tests. The bold curves correspond to th...
In this paper an energy criterion for fatigue failure is postulated. Micro-plastic strain hysteresis...
The strain-life approach is now commonly used for fatigue life analysis and predictions in the groun...
For each specimen, the load-displacment curves are plotted under the different testing conditions (f...
The strain-life approach is now commonly used for fatigue life analysis and predictions in the groun...
Axial-strain controlled low cycle fatigue tests were performed on several materials in different met...