The measured crack spacing obtained from substrate straining was analysed statistically using SPSS software to obtained the frequency distribution of the crack spacing for the films exposed to Ringers solution for 1 month. The observed crack distribution was fitted to the normal, lognormal and weibull probability distribution function. The function that gave the best fit was used to calculate the mean crack spacing of the coatings exposed to Ringers solution
Uniaxial straining of a brittle film on a ductile substrate induces the formation of an array of par...
This paper contributes to a TEM examination on the oxide films formed at three locations along a cra...
In order to investigate variations of spatial distributions of cracks observed on the unnotched spec...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
Consider a thin film resting on a relatively thick substrate. When the substrate is subjected to an ...
Chromium oxide coatings prepared by radiofrequency reactive magnetron sputtering on stainless steel ...
In this work, the influence of different crack arrangements in the stress distribution of hard chrom...
Abstract. Consider a thin film resting on a relatively thick substrate. When the substrate is subjec...
The mechanical and cracking behavior of a Cr coating, deposited on an Optimized ZIRLOTM substrate us...
The initial micro-crack density of a chromium coating/steel substrate with and without laser pre-que...
International audienceThe mechanical behavior of a 15 µm-thick chromium coating, deposited on a zirc...
This letter describes the evolution of crack spacing in copper films (bonded to elastomer substrates...
We investigate crack formation in deposition films from drying colloidal suspension drops, by varyin...
Uniaxial straining of a brittle film on a ductile substrate induces the formation of an array of par...
This paper contributes to a TEM examination on the oxide films formed at three locations along a cra...
In order to investigate variations of spatial distributions of cracks observed on the unnotched spec...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
The measured crack spacing obtained from substrate straining was analysed statistically using SPSS s...
Consider a thin film resting on a relatively thick substrate. When the substrate is subjected to an ...
Chromium oxide coatings prepared by radiofrequency reactive magnetron sputtering on stainless steel ...
In this work, the influence of different crack arrangements in the stress distribution of hard chrom...
Abstract. Consider a thin film resting on a relatively thick substrate. When the substrate is subjec...
The mechanical and cracking behavior of a Cr coating, deposited on an Optimized ZIRLOTM substrate us...
The initial micro-crack density of a chromium coating/steel substrate with and without laser pre-que...
International audienceThe mechanical behavior of a 15 µm-thick chromium coating, deposited on a zirc...
This letter describes the evolution of crack spacing in copper films (bonded to elastomer substrates...
We investigate crack formation in deposition films from drying colloidal suspension drops, by varyin...
Uniaxial straining of a brittle film on a ductile substrate induces the formation of an array of par...
This paper contributes to a TEM examination on the oxide films formed at three locations along a cra...
In order to investigate variations of spatial distributions of cracks observed on the unnotched spec...