Implicit finite element formulations for multi-phase transformation in high carbon steel

An anomalous plastic deformation observed during the phase transformation of steels was implemented into the finite element modeling. The constitutive equations for the transformation plasticity originally proposed by Greenwood and Johnson [Greenwood, G.W., Johnson, R.H., 1965. The deformation of metals under small stresses during phase transformation. Proc. Roy. Soc. A 283, 403] and further extended by Leblond et al. [Leblond, JR, Mottet, G., Devaux, J.C., 1986a. A theoretical and numerical approach to the plastic behavior of steels during phase transformations, I. Derivation of general relations. J. Mech. Phys. Solids 34, 395-409; Leblond, J.B., Mottet, G., Devaux, J.C., 1986b. A theoretical and numerical approach to the plastic behavior of steels during phase transformations, II. Study of classical plasticity for ideal-plastic phases. J. Mech. Phys. Solids 34, 411-432; Leblond, JR, Devaux, J., Devaux, J.C., 1989a. Mathematical modeling of transformation plasticity in steels, 1: case of ideal-plastic phases. Int. J. Plasticity 5, 511-572; Leblond, J.B., 1989b. Mathematical modeling of transformation plasticity in steels, H: coupling with strain hardening phenomena. Int. J. Plasticity 5, 573-591] were modified to consider the thermo-mechanical response of generalized multi-phase steel during phase transformations from austenite at high temperature. An implicit numerical solution procedure to calculate the plastic deformation of each constituent phase was newly proposed and implemented into the general purpose implicit finite element program via user material subroutine. The new algorithms include efficient calculation of consistent tangent modulus for the transformation plasticity and application of general anisotropic yield functions without limitation to the isotropic yield function. Besides the thermo-elastic-plastic constitutive equations, non-isothermal transformation kinetics was characterized by the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation and additivity relationship for the diffusional transformation, while the model proposed by Koistinen and Marburger was used for the diffusionless transformation. Numerical verifications for the continuous cooling experiments, under various loading conditions were conducted to demonstrate the applicability of the developed numerical algorithms to the high carbon steel SK5. (C) 2008 Elsevier Ltd. All rights reserved.X114042sciescopu