Competition between work-hardening effect and dynamic-softening behavior of as-cast GH4720Li superalloys with original dendrite microstructure during moderate-speed deformation was quantitatively investigated in this present paper. Flow behavior for processing the studied alloys with dendrite microstructure behaves typical three stages, caused by the competition effect between work-hardening and dynamic-softening. The relationships between work-hardening rate and true strain and true stress were derived from Kocks-Mecking dislocation relation. The work-hardening effect shows two obvious stages with strain, viz. steady fluctuations and linear decreasing. An obvious work-hardening effect was demonstrated under lower temperature and higher str...
By carrying out hot compression experiments for 316 L austenitic stainless steel under dynamic chang...
The hot deformation behaviors of a solution-treated Ni-based superalloy are investigated by hot comp...
This research conducted a thermal compression deformation test on two GH4169 alloy samples with 5.40...
GH4738 superalloy is a key material for gas turbine engines, yet its relatively poor thermoplasticit...
Hot deformation behaviour of hot isostatically processed (HIPed) experimental nickel superalloy in t...
The thermal deformation and dynamic recrystallization (DRX) behavior of a nickel-based superalloy we...
This review article provides an in-depth discussion on the hot deformability, processing map analysi...
International audienceThe mechanical properties of nickel superalloys are related to the spatial dis...
The deformation behavior of IN718 superalloy was investigated using the hot compression tests in the...
Cobalt-based superalloys have good service performance in environments where nickel-based superalloy...
In this paper, the dynamic mechanical properties of GH4720Li nickel-base alloy under a large tempera...
Isothermal compression test of GH2907 superalloy was conducted by Gleeble-3500 thermal simulator, th...
The hot deformation behavior of A-286 superalloy has been characterized using hot compression experi...
The deformation behaviors (flow behavior, power dissipation, dynamic recrystallization, and microstr...
By carrying out hot compression experiments for 316 L austenitic stainless steel under dynamic chang...
By carrying out hot compression experiments for 316 L austenitic stainless steel under dynamic chang...
The hot deformation behaviors of a solution-treated Ni-based superalloy are investigated by hot comp...
This research conducted a thermal compression deformation test on two GH4169 alloy samples with 5.40...
GH4738 superalloy is a key material for gas turbine engines, yet its relatively poor thermoplasticit...
Hot deformation behaviour of hot isostatically processed (HIPed) experimental nickel superalloy in t...
The thermal deformation and dynamic recrystallization (DRX) behavior of a nickel-based superalloy we...
This review article provides an in-depth discussion on the hot deformability, processing map analysi...
International audienceThe mechanical properties of nickel superalloys are related to the spatial dis...
The deformation behavior of IN718 superalloy was investigated using the hot compression tests in the...
Cobalt-based superalloys have good service performance in environments where nickel-based superalloy...
In this paper, the dynamic mechanical properties of GH4720Li nickel-base alloy under a large tempera...
Isothermal compression test of GH2907 superalloy was conducted by Gleeble-3500 thermal simulator, th...
The hot deformation behavior of A-286 superalloy has been characterized using hot compression experi...
The deformation behaviors (flow behavior, power dissipation, dynamic recrystallization, and microstr...
By carrying out hot compression experiments for 316 L austenitic stainless steel under dynamic chang...
By carrying out hot compression experiments for 316 L austenitic stainless steel under dynamic chang...
The hot deformation behaviors of a solution-treated Ni-based superalloy are investigated by hot comp...
This research conducted a thermal compression deformation test on two GH4169 alloy samples with 5.40...