The fabrication processing, dielectric properties and thermal properties of polymer-matrix composites containing AlN particles (10μm) for electronic substrates and microelectronic packaging applications were investigated. The epoxy resin (E-51) is used as the matrix, and the dispersion of the AlN in the composites is varied form 0 vol% to 40 vol%. The microstructures of the polymer-matrix composites are observed through scanning electron microscopy (SEM). With increasing the AlN content, thermal conducting of composites is improved, while the composites still keep the relatively low dielectric constant and dielectric loss. According to the dielectric properties dependence on frequencies (1kHz-10MHz) of the composites, the Cole-Cole plot is ...
Insulation based on epoxy resin is widely used in high voltage applications. This paper shows the fo...
The interface between the polymer and the particle has a critical role in altering the properties of...
This paper investigates the structure of bisphenol-A epoxy based composites with low amounts of alum...
The dielectric properties of nanocomposites composed of epoxy resin host and aluminum nitride (AlN) ...
In order to improve the thermal properties of polymer at lower filler content, polystyrene (PS) comp...
Polymer modified fillers in composites has attracted the attention of numerous researchers. These fi...
Aluminum nitride (AlN) with high thermal conductivity was blended in polyarylene ether nitrile (PEN)...
Polymer-based composites with high thermal conductivity and dielectric breakdown strength have gaine...
The research described in this thesis is part of a state-funded IOP-EMVT project in cooperation with...
ABSTRACT: Dielectric properties of Al–epoxy compos-ites were characterized as a function of composit...
In recent times, there has been an ever-growing need for polymer-based multifunctional materials for...
Due to the excellent dielectric properties and potential high operation temperature, polypropylene (...
Recent development of higher power and higher speed in integrated circuits has led to a correspondin...
In this work, four loading amounts of trimethoxy (octyl) silane (C8-M) were used in preparing C8-M t...
In this work, aluminum nitride particles (AlN) and boron nitride whiskers (BNw) were surface-functio...
Insulation based on epoxy resin is widely used in high voltage applications. This paper shows the fo...
The interface between the polymer and the particle has a critical role in altering the properties of...
This paper investigates the structure of bisphenol-A epoxy based composites with low amounts of alum...
The dielectric properties of nanocomposites composed of epoxy resin host and aluminum nitride (AlN) ...
In order to improve the thermal properties of polymer at lower filler content, polystyrene (PS) comp...
Polymer modified fillers in composites has attracted the attention of numerous researchers. These fi...
Aluminum nitride (AlN) with high thermal conductivity was blended in polyarylene ether nitrile (PEN)...
Polymer-based composites with high thermal conductivity and dielectric breakdown strength have gaine...
The research described in this thesis is part of a state-funded IOP-EMVT project in cooperation with...
ABSTRACT: Dielectric properties of Al–epoxy compos-ites were characterized as a function of composit...
In recent times, there has been an ever-growing need for polymer-based multifunctional materials for...
Due to the excellent dielectric properties and potential high operation temperature, polypropylene (...
Recent development of higher power and higher speed in integrated circuits has led to a correspondin...
In this work, four loading amounts of trimethoxy (octyl) silane (C8-M) were used in preparing C8-M t...
In this work, aluminum nitride particles (AlN) and boron nitride whiskers (BNw) were surface-functio...
Insulation based on epoxy resin is widely used in high voltage applications. This paper shows the fo...
The interface between the polymer and the particle has a critical role in altering the properties of...
This paper investigates the structure of bisphenol-A epoxy based composites with low amounts of alum...