5th International Conference on Bulk Metallic Glasses, Awaji Isl, Japan, 1-5 October 2006A Ni-free bulk metallic glass (BMG) of Zr60Nb5Cu20Fe5Al10 with a diameter of 3 mm was successfully prepared by copper mold casting The structure and thermal stability of the BMG were studied by x-ray diffraction (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). It is found that the BMG is apparently of a single amorphous structure and exhibits a wide supercooled liquid region of 101 degrees C. A static-state compression revealed that the BMG possesses a superior fracture strength of 1709 MP and extended plastic strain of 9.5%. The corrosion resistance of the BMG was examined by electrochemical polarization in pho...
AbstractThe aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al...
Ti40Zr10Cu36Pd14 Bulk Metallic Glass (BMG) appears very attractive for future biomedical application...
The aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al10 Bulk ...
Two Ni- and Cu-free bulk metallic glasses (BMGs) of Zr65Pd 17.5Fe10Al7.5 and Zr65Pd 12.5Ag5Fe10Al7.5...
A series of novel Ni free Zr-based bulk metallic glasses (BMGs) with composition of Zr48Cu45Al7 (Ag0...
The mechanical properties at room temperature and the corrosion behavior in simulated body fluid (PB...
International audienceNi- and Cu-free Zr-Al-Co-Ag bulk metallic glasses (BMGs) with diameters up to ...
The effect of Nb and Pd combination on the glass forming ability (GFA) and mechanical properties of ...
With pure Ti and pure Zr as controls, the corrosion resistance, ion release behavior, and in vitro b...
In this study, a novel Sr-based bulk metallic glass (BMG) with nominal composition of Sr40Mg20Zn15Yb...
With a continuously increasing aging population and the improvement of living standards, large deman...
The acceptability of implants by the human body is a very important requirement in the field of biom...
[[abstract]]Improving the resistance of bulk metallic glass (BMG) to corrosion, particularly pitting...
Zr70−xCu12.5Ni10Al7.5Agx (x = 0–10) bulk metallic glasses (BMGs) have been prepared by copper mold c...
The corrosion performance of a Nickel-free Fe-based bulk metallic glass (BMG). Fe(41)Co(7)Cr(15)Mo(1...
AbstractThe aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al...
Ti40Zr10Cu36Pd14 Bulk Metallic Glass (BMG) appears very attractive for future biomedical application...
The aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al10 Bulk ...
Two Ni- and Cu-free bulk metallic glasses (BMGs) of Zr65Pd 17.5Fe10Al7.5 and Zr65Pd 12.5Ag5Fe10Al7.5...
A series of novel Ni free Zr-based bulk metallic glasses (BMGs) with composition of Zr48Cu45Al7 (Ag0...
The mechanical properties at room temperature and the corrosion behavior in simulated body fluid (PB...
International audienceNi- and Cu-free Zr-Al-Co-Ag bulk metallic glasses (BMGs) with diameters up to ...
The effect of Nb and Pd combination on the glass forming ability (GFA) and mechanical properties of ...
With pure Ti and pure Zr as controls, the corrosion resistance, ion release behavior, and in vitro b...
In this study, a novel Sr-based bulk metallic glass (BMG) with nominal composition of Sr40Mg20Zn15Yb...
With a continuously increasing aging population and the improvement of living standards, large deman...
The acceptability of implants by the human body is a very important requirement in the field of biom...
[[abstract]]Improving the resistance of bulk metallic glass (BMG) to corrosion, particularly pitting...
Zr70−xCu12.5Ni10Al7.5Agx (x = 0–10) bulk metallic glasses (BMGs) have been prepared by copper mold c...
The corrosion performance of a Nickel-free Fe-based bulk metallic glass (BMG). Fe(41)Co(7)Cr(15)Mo(1...
AbstractThe aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al...
Ti40Zr10Cu36Pd14 Bulk Metallic Glass (BMG) appears very attractive for future biomedical application...
The aim of the present project was to investigate the possibilities of using a Zr55Cu30Ni5Al10 Bulk ...