Characterization of impingement region from an impinging inverse diffusion flame jet

This investigation is on the characterization of the impingement region of an inverse diffusion flame (IDF) jet. The length of the jet impingement region (Li), the characteristics of the wall gauge static pressure (ΔPw) and heat flux (q′) in the impingement region, were studied. A similarity is found between the radial distributions of ΔP w and q′, which enables a comparative study on ΔP w and q′. The effects of the non-dimensional nozzle-to-plate distance (H/da), the flame equivalence ratio (Φ), and the air port diameter (da) on ΔPw and q′ are studied comparatively. It is found that while the distribution curves of ΔP w are always bell-shaped with a maximum stagnation pressure (ΔPs), those of q′ vary in shape under different H/d a. The maximum heat flux (qmax′), the average heat flux (q̄i), the distributions of the nondimensional wall static pressure (ΔPw/ΔPs) and the nondimensional heat flux (q′/qmax′), in the impingement region, are studied. The thermal efficiency of the IDF impingement heating system (ηth) is evaluated and compared under different operational conditions. The current investigation provides the insights into the characteristics of the jet impingement region by correlating the heat transfer performance to the hydrodynamic behaviour, which facilitates the optimization of the jet impingement system design and operation.Department of Mechanical Engineerin