A significant enhancement of plasticity and toughness was achieved by increasing Zr content but decreasing Cu content in the Zr-Cu-Ni-Al-Ta bulk metallic glass system. It was found that higher Zr content induces strong icosahedral medium-range order clusters in amorphous phase which, in turn, cause heterogeneous distribution of free volume and eventually lead to the enhancement of plasticity and toughness of the monolithic bulk metallic glasses.Department of Industrial and Systems Engineerin
We investigated the microstructure and mechanical properties of (Zr0:5Cu0:4Al0:1)100xTax (x 0{12) b...
Recently, a series of quaternary Zr-based bulk metallic glasses (BMGs), i.e., Zr53Cu18.7Ni12Al16.3, ...
The influences of Ag and Co additions on the thermal stability and glass-forming abilities of twenty...
By means of the computational thermodynamic approach, the potential compositions of Zr-Cu-Ni-Al allo...
An in situ formed intermetallic phase/bulk metallic glass composite with high strength and good plas...
The effect of the minor addition of elements Ta and Fe on the mechanical properties of the CuZrAl BM...
The structural origins for the high plasticity of a Zr(53)Cu(18.7)Ni(12)Al(16.3) (at.%) bulk metalli...
<p>The dependence of microstructure on the alloy composition and cooling rate of a series of (Zr0.5C...
A series of Zr50.75Cu35.75Al8.5Ag5 bulk metallic glasses (BMGs) were prepared by controlling the coo...
Zr-Cu-Ni-Al quaternary amorphous alloy compositions with varying glass-forming ability are developed...
Zr48.5Cu46.5Al5 bulk metallic glass (BMG) composites with diameters of 3 and,4 mm were prepared thro...
Inadequate room-temperature plasticity limits the application of bulk metallic glasses (BMGs). This ...
A group of plastic Zr-Al-Ni-Cu bulk metallic glasses (BMGs) with low Zr content was developed and th...
In this work, a Zr50Cu48Al2 bulk metallic glass (BMG) with improved glass forming ability and mechan...
The microstructure and mechanical properties of Zr48Cu 48-x Al4Mx (M≡Fe or Co, x=0, 0.5, 1 at.%) met...
We investigated the microstructure and mechanical properties of (Zr0:5Cu0:4Al0:1)100xTax (x 0{12) b...
Recently, a series of quaternary Zr-based bulk metallic glasses (BMGs), i.e., Zr53Cu18.7Ni12Al16.3, ...
The influences of Ag and Co additions on the thermal stability and glass-forming abilities of twenty...
By means of the computational thermodynamic approach, the potential compositions of Zr-Cu-Ni-Al allo...
An in situ formed intermetallic phase/bulk metallic glass composite with high strength and good plas...
The effect of the minor addition of elements Ta and Fe on the mechanical properties of the CuZrAl BM...
The structural origins for the high plasticity of a Zr(53)Cu(18.7)Ni(12)Al(16.3) (at.%) bulk metalli...
<p>The dependence of microstructure on the alloy composition and cooling rate of a series of (Zr0.5C...
A series of Zr50.75Cu35.75Al8.5Ag5 bulk metallic glasses (BMGs) were prepared by controlling the coo...
Zr-Cu-Ni-Al quaternary amorphous alloy compositions with varying glass-forming ability are developed...
Zr48.5Cu46.5Al5 bulk metallic glass (BMG) composites with diameters of 3 and,4 mm were prepared thro...
Inadequate room-temperature plasticity limits the application of bulk metallic glasses (BMGs). This ...
A group of plastic Zr-Al-Ni-Cu bulk metallic glasses (BMGs) with low Zr content was developed and th...
In this work, a Zr50Cu48Al2 bulk metallic glass (BMG) with improved glass forming ability and mechan...
The microstructure and mechanical properties of Zr48Cu 48-x Al4Mx (M≡Fe or Co, x=0, 0.5, 1 at.%) met...
We investigated the microstructure and mechanical properties of (Zr0:5Cu0:4Al0:1)100xTax (x 0{12) b...
Recently, a series of quaternary Zr-based bulk metallic glasses (BMGs), i.e., Zr53Cu18.7Ni12Al16.3, ...
The influences of Ag and Co additions on the thermal stability and glass-forming abilities of twenty...