A study is carried out to compare the nonlinear behavior of piezoceramics and piezocomposites. The complex material parameters including losses were determined by model fittings. An experimental system has been used to investigate the ac electric field dependence of the properties of the transducer materials, including lead zirconate titanate (PZT) and PZT/epoxy 1-3 composite rings. An analysis of the changes in the real parts of the material constants (i.e. stiffness, permittivity, and electromechanical coupling coefficients) and loss factors have been made. Under a high ac field, compared to PZT ceramics, the 1-3 composites were found to have different nonlinear behavior. This characterization is necessary for using the piezocomposite in ...
PZT4NFzNF, 0-3 composites with different volume percent of ceramic have been fabricated The dielectr...
In this work, the piezoelectric properties at high electric fields of dielectrophoretically aligned ...
The main objective of this PhD thesis is to develop new routes and concepts for manufacturing piezoe...
A comparative nonlinear characterization is carried out between the nonlinear behavior of a composi...
The high power characteristics of various piezoelectric ceramics and 1-3 composites were investigate...
International audienceNonlinear measurements of dense 63PbIn1/2Nb1/2- 37PbTiO3 (PIN-37PT) piezoceram...
The uni-axial non-linear large signal behavior of PIC 151 soft PZT ceramics was experimentally inves...
New composite materials and devices are been investigated by researchers in the fields of energy har...
Piezoelectric composites made from soft and hard lead zirconium titanate (PZT) particles as filler a...
Acomparative study between the nonlinear behavior of a composite and the piezoceramic, that has been...
AbstractDomain switching in piezoelectric materials is caused by external loads such as electric fie...
Over the past two decades, materials engineers have developed piezoelectric-polymer composite materi...
The influence of electric field and temperature on power consumption of piezoelectric actuated int...
The alteration of the high-field electrical permittivity (nonlinear response) of PZT-based ceramics ...
The large number of degrees of freedom in the design of piezoelectric transducers requires a theoret...
PZT4NFzNF, 0-3 composites with different volume percent of ceramic have been fabricated The dielectr...
In this work, the piezoelectric properties at high electric fields of dielectrophoretically aligned ...
The main objective of this PhD thesis is to develop new routes and concepts for manufacturing piezoe...
A comparative nonlinear characterization is carried out between the nonlinear behavior of a composi...
The high power characteristics of various piezoelectric ceramics and 1-3 composites were investigate...
International audienceNonlinear measurements of dense 63PbIn1/2Nb1/2- 37PbTiO3 (PIN-37PT) piezoceram...
The uni-axial non-linear large signal behavior of PIC 151 soft PZT ceramics was experimentally inves...
New composite materials and devices are been investigated by researchers in the fields of energy har...
Piezoelectric composites made from soft and hard lead zirconium titanate (PZT) particles as filler a...
Acomparative study between the nonlinear behavior of a composite and the piezoceramic, that has been...
AbstractDomain switching in piezoelectric materials is caused by external loads such as electric fie...
Over the past two decades, materials engineers have developed piezoelectric-polymer composite materi...
The influence of electric field and temperature on power consumption of piezoelectric actuated int...
The alteration of the high-field electrical permittivity (nonlinear response) of PZT-based ceramics ...
The large number of degrees of freedom in the design of piezoelectric transducers requires a theoret...
PZT4NFzNF, 0-3 composites with different volume percent of ceramic have been fabricated The dielectr...
In this work, the piezoelectric properties at high electric fields of dielectrophoretically aligned ...
The main objective of this PhD thesis is to develop new routes and concepts for manufacturing piezoe...