Add to ORKGMetal matrix composite (MMC) surface layer have been formed on 6061 aluminium alloy-surface by laser cladding of using a 2kW continuous wave (CW) Nd-YAG laser. The TiC particle reinforced Al-Ti composite coating was prepared by in-situ contact- reaction with preplaced powder mixtures of Ti and SiC. The formation mechanism of TiC particles has been studied. It was found that composite coating consisting of TiC particles dispersed in coating matrix could be obtained using the correct ratio of Ti to SiC powders and a laser-power density. Compound material cladding coating mainly consists of Ti-Al intermetallic compound and Al supersaturated solid solution. The coating was characterized by good metallurgical bonding between the coating and the ...
Mechanical alloying of Ti-Al-graphite elemental powder mixture was performed to synthesize nanocompo...
The Ti<sub>x</sub>Al<sub>y</sub>-TiN composite coatings were in-situ synthesized on Ti-6Al-4V alloy ...
Laser processing of Ti-SiC composite coating on titanium was carried out to improve wear resistance ...
A new Ti-based composite coating reinforced with fine and dispersive TiC particles was prepared on T...
Different weight ratio of titanium and SiC powders were mixed and then laser surface alloyed onto Al...
Most laser clad surface layers on aluminium alloys consist of a hard carbide phase and an aluminium ...
Surface alloys are of great interest for improving the mechanical and/or chemical properties of the ...
In this paper, a TiC reinforcement metal matrix composite coating is produced using nickel and graph...
TiC-reinforced metal matrix composites were fabricated by laser cladding and FeCrCoNiAlTiC high entr...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
Surface composite coatings of Al7075 containing titanium carbide (TiC) particles were fabricated usi...
The present study concerns development of a hard SiC dispersed composite layer on an Al substrate to...
Metal matrix composite (MMC) coatings have good wear resistance, given the combined ductility of the...
The in situ synthesis of a TiC/Ti composite layer on Ti-6Al-4V by laser cladding using Cr3C2 and Ti ...
Laser cladding is an adequate technique to fabricate Metal Matrix Composite (MMC) layers because of ...
Mechanical alloying of Ti-Al-graphite elemental powder mixture was performed to synthesize nanocompo...
The Ti<sub>x</sub>Al<sub>y</sub>-TiN composite coatings were in-situ synthesized on Ti-6Al-4V alloy ...
Laser processing of Ti-SiC composite coating on titanium was carried out to improve wear resistance ...
A new Ti-based composite coating reinforced with fine and dispersive TiC particles was prepared on T...
Different weight ratio of titanium and SiC powders were mixed and then laser surface alloyed onto Al...
Most laser clad surface layers on aluminium alloys consist of a hard carbide phase and an aluminium ...
Surface alloys are of great interest for improving the mechanical and/or chemical properties of the ...
In this paper, a TiC reinforcement metal matrix composite coating is produced using nickel and graph...
TiC-reinforced metal matrix composites were fabricated by laser cladding and FeCrCoNiAlTiC high entr...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
Surface composite coatings of Al7075 containing titanium carbide (TiC) particles were fabricated usi...
The present study concerns development of a hard SiC dispersed composite layer on an Al substrate to...
Metal matrix composite (MMC) coatings have good wear resistance, given the combined ductility of the...
The in situ synthesis of a TiC/Ti composite layer on Ti-6Al-4V by laser cladding using Cr3C2 and Ti ...
Laser cladding is an adequate technique to fabricate Metal Matrix Composite (MMC) layers because of ...
Mechanical alloying of Ti-Al-graphite elemental powder mixture was performed to synthesize nanocompo...
The Ti<sub>x</sub>Al<sub>y</sub>-TiN composite coatings were in-situ synthesized on Ti-6Al-4V alloy ...
Laser processing of Ti-SiC composite coating on titanium was carried out to improve wear resistance ...