Single-mode fibre lasers operating at ~1.57µm are described. Output powers of >2 mW are reported for laser diode pumped operation. Direct comparison is made between fibre lasers employing sensitized erbium (Er3+ and Yb3+) and erbium on its own. The performance of Er3+-Yb3+ fibre lasers is then analyzed in more detail as a function of fibre length. Both CW and Q-switched operation are studied and the results obtained demonstrate that practical sources at 1.5µm are available from diode pumped Er3+-Yb3+ systems
Single-mode double-clad Er3+/Yb3+ co-doped fibers are shown to be suitable for diode array pumping a...
One of the most attractive features of fibre lasers is their ability to produce significant pulse po...
A high power (96mW) Er3+/Yb3+ fibre laser pumped with a 962nm diode array is reported. The device op...
The Er3+ fibre laser operates at a wavelength between 1.5 and 1.6 microns and is thus of interest fo...
Erbium-doped fibers show promise as stable narrow-linewidth laser sources and optical amplifiers ope...
Rare-earth doped fibre lasers and amplifiers are attractive for use in fibre optic sensor and fibre ...
The field of rare-earth-doped fibre lasers and amplifiers has expanded rapidly in recent years and t...
This thesis reports on the experimental study of high-power, high-energy, cladding-pumped, rare-eart...
This thesis reports on the experimental study of high-power, high-energy, cladding-pumped, rare-eart...
This thesis reports on the exploitation of the cladding pumping technique to scale the output power ...
This thesis describes the development and characterisation of single-mode optical fibre lasers and a...
An Er3+-doped single-mode fiber laser with an extended output wavelength range around 1.55µm is repo...
Fibre devices technology has reached a mature status over the last few years. It has been an importa...
We report operation of a high-efficiency Yb:Er single-mode fibre laser. Pumping at wavelengths of 10...
Recent advances in the field of Er3+-doped optical fibre amplifiers and lasers operating around λ = ...
Single-mode double-clad Er3+/Yb3+ co-doped fibers are shown to be suitable for diode array pumping a...
One of the most attractive features of fibre lasers is their ability to produce significant pulse po...
A high power (96mW) Er3+/Yb3+ fibre laser pumped with a 962nm diode array is reported. The device op...
The Er3+ fibre laser operates at a wavelength between 1.5 and 1.6 microns and is thus of interest fo...
Erbium-doped fibers show promise as stable narrow-linewidth laser sources and optical amplifiers ope...
Rare-earth doped fibre lasers and amplifiers are attractive for use in fibre optic sensor and fibre ...
The field of rare-earth-doped fibre lasers and amplifiers has expanded rapidly in recent years and t...
This thesis reports on the experimental study of high-power, high-energy, cladding-pumped, rare-eart...
This thesis reports on the experimental study of high-power, high-energy, cladding-pumped, rare-eart...
This thesis reports on the exploitation of the cladding pumping technique to scale the output power ...
This thesis describes the development and characterisation of single-mode optical fibre lasers and a...
An Er3+-doped single-mode fiber laser with an extended output wavelength range around 1.55µm is repo...
Fibre devices technology has reached a mature status over the last few years. It has been an importa...
We report operation of a high-efficiency Yb:Er single-mode fibre laser. Pumping at wavelengths of 10...
Recent advances in the field of Er3+-doped optical fibre amplifiers and lasers operating around λ = ...
Single-mode double-clad Er3+/Yb3+ co-doped fibers are shown to be suitable for diode array pumping a...
One of the most attractive features of fibre lasers is their ability to produce significant pulse po...
A high power (96mW) Er3+/Yb3+ fibre laser pumped with a 962nm diode array is reported. The device op...