Energy-filtered transmission electron microscopy images are acquired during the reduction of a NiO-YSZ composite in H-2 up to 600 degrees C. Temperature-resolved quantitative information about both chemistry and structure is extracted with nm spatial resolution from the data, paving the way for the development of detailed reduction models
Thin single-crystal yttrium-stabilized zirconia (YSZ) substrate was prepared by indentation fracture...
Solid oxide fuel cells (SOFCs) are promising energy conversion devices, but their economic viability...
The nucleation and growth of metallic particles within metal-doped oxides exposed to reducing condit...
Energy-filtered transmission electron microscopy images are acquired during the reduction of a NiO–Y...
A novel approach, which is based on the analysis of sequences of images recorded using energy-filter...
The NiO-YSZ composites with 30wt%, 50wt.% and 70wt.% NiO were investigated by the temperature progra...
A novel approach, which is based on the analysis of sequences of images recorded using energy-filter...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Effect of redox cycling on a Ni-YSZ anode prepared from 50 wt.% NiO and 50 wt.% YSZ was investigated...
In situ reduction of nickel oxide (NiO) particles is performed under 1.3mbar of hydrogen gas (H2) in...
This article reports on in situ macroscopic scale imaging of NiO-YSZ (YSZ is yttria-stabilized zirco...
Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a re...
The dimensional behavior of Ni–yttria-stabilized zirconia (YSZ) cermets during redox cycling was tes...
Ni/8YSZ pellet was exposed to the high temperature (1073 K) redox cycle repeatedly and the microstru...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Thin single-crystal yttrium-stabilized zirconia (YSZ) substrate was prepared by indentation fracture...
Solid oxide fuel cells (SOFCs) are promising energy conversion devices, but their economic viability...
The nucleation and growth of metallic particles within metal-doped oxides exposed to reducing condit...
Energy-filtered transmission electron microscopy images are acquired during the reduction of a NiO–Y...
A novel approach, which is based on the analysis of sequences of images recorded using energy-filter...
The NiO-YSZ composites with 30wt%, 50wt.% and 70wt.% NiO were investigated by the temperature progra...
A novel approach, which is based on the analysis of sequences of images recorded using energy-filter...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Effect of redox cycling on a Ni-YSZ anode prepared from 50 wt.% NiO and 50 wt.% YSZ was investigated...
In situ reduction of nickel oxide (NiO) particles is performed under 1.3mbar of hydrogen gas (H2) in...
This article reports on in situ macroscopic scale imaging of NiO-YSZ (YSZ is yttria-stabilized zirco...
Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a re...
The dimensional behavior of Ni–yttria-stabilized zirconia (YSZ) cermets during redox cycling was tes...
Ni/8YSZ pellet was exposed to the high temperature (1073 K) redox cycle repeatedly and the microstru...
Environmental transmission electron microscopy was used to characterize in situ the reduction and ox...
Thin single-crystal yttrium-stabilized zirconia (YSZ) substrate was prepared by indentation fracture...
Solid oxide fuel cells (SOFCs) are promising energy conversion devices, but their economic viability...
The nucleation and growth of metallic particles within metal-doped oxides exposed to reducing condit...