A low-energy 2.4GHz RF transceiver supporting 1Mb/s Gaussian Frequency-Shift Keying modulation and designed to run on a 1.5V battery is implemented in a standard 0.18μm CMOS technology. The integrated DC-DC converter can provide up to 100mA to an external load besides the current required by the transceiver. The transmitter current at 0dBm nominal output power is 11.9mA. The receiver draws 11.4mA and presents a sensitivity of -82.5dBm at a bit-error rate of 0.1% with the on-chip DC-DC converter delivering a total of 120mA. The transceiver is able to operate at a supply voltage as low as 0.8V
SUMMARY A low-power low-noise intermediate-frequency (IF) cir-cuit is proposed for Gaussian frequenc...
Abstract — This paper describes a fundamentally flexible low power transceiver implemented in 90 nm...
In recent years the demand has surged for low-power and small form-factor wireless communications de...
This paper describes the design and measurement results of a low-power highly digitized receiver for...
This paper describes the radio transceiver for Bluetooth application operating at 2.4GHz ISM band. ...
A radio-frequency transceiver chip was designed in a UMC RF 0.18 µm CMOS process. The target RF freq...
A broad range of high-volume consumer applications require low-power, battery operated, wireless mic...
A low power and energy efficient transceiver architecture is introduced. It is implemented on a sing...
A novel CMOS transmitter with low TX noise and high linearity is implemented in a 0.18μm 1P6M standa...
In the first part of the paper, also in this issue of the JOURNAL, the design of the frequency synth...
Fig. 8, a reference design achieves 6.3 % EVM for an output power of 3 dBm for sub-gigahertz ISM-ban...
In this paper, a passive 2.45GHz band RFID transponder chip for high data rate communication and wit...
A radio-frequency transceiver chip was designed in a UMC RF 0.18 µm CMOS process. The target RF freq...
In this paper, a low power transceiver for wireless sensor networks (WSN) is proposed. The system is...
[[abstract]]In this paper, a passive 2.45GHz band RFID transponder chip for high data rate communica...
SUMMARY A low-power low-noise intermediate-frequency (IF) cir-cuit is proposed for Gaussian frequenc...
Abstract — This paper describes a fundamentally flexible low power transceiver implemented in 90 nm...
In recent years the demand has surged for low-power and small form-factor wireless communications de...
This paper describes the design and measurement results of a low-power highly digitized receiver for...
This paper describes the radio transceiver for Bluetooth application operating at 2.4GHz ISM band. ...
A radio-frequency transceiver chip was designed in a UMC RF 0.18 µm CMOS process. The target RF freq...
A broad range of high-volume consumer applications require low-power, battery operated, wireless mic...
A low power and energy efficient transceiver architecture is introduced. It is implemented on a sing...
A novel CMOS transmitter with low TX noise and high linearity is implemented in a 0.18μm 1P6M standa...
In the first part of the paper, also in this issue of the JOURNAL, the design of the frequency synth...
Fig. 8, a reference design achieves 6.3 % EVM for an output power of 3 dBm for sub-gigahertz ISM-ban...
In this paper, a passive 2.45GHz band RFID transponder chip for high data rate communication and wit...
A radio-frequency transceiver chip was designed in a UMC RF 0.18 µm CMOS process. The target RF freq...
In this paper, a low power transceiver for wireless sensor networks (WSN) is proposed. The system is...
[[abstract]]In this paper, a passive 2.45GHz band RFID transponder chip for high data rate communica...
SUMMARY A low-power low-noise intermediate-frequency (IF) cir-cuit is proposed for Gaussian frequenc...
Abstract — This paper describes a fundamentally flexible low power transceiver implemented in 90 nm...
In recent years the demand has surged for low-power and small form-factor wireless communications de...