Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °C is a necessity for Solid Oxide Fuel/Electrolysis Cells (SOFC/SOECs). In this respect the application of proton-conducting oxides has become a broad area of research. Materials that can conduct protons and electrons at the same time, to be used as electrode catalysts on the air electrode, are especially rare. In this article we report on the proton conduction in expitaxially grown BaFeO2.5+δ (BFO) thin films deposited by pulsed laser deposition on Nb:SrTiO3 substrates. By using Electrochemical Impedance Spectroscopy (EIS) measurements under different wet and dry atmospheres, the bulk proton conductivity of BFO (between 200 °C and 300 °C) cou...
Low-temperature solid oxide fuel cells (LT-SOFCs) have attracted significant attention because of the...
Reducing the operating temperature in the 500–750 C range is needed for widespread use of solid oxi...
The need for reducing the solid oxide fuel cell (SOFC) operating temperature below 600 °C is imposed...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 650 °...
Barium ferrite and its hydrated form (BaFeO2.5−x+δ (OH)2x , BFO) is an interesting cathode material ...
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2006.In...
Cathode materials for proton-conducting ceramic fuel cells (PCFC) should combine electronic conducti...
N. Radenahmad and A. Afif are thankful to Universiti Brunei Darussalam for sponsoring the UBD gradua...
Fuel cells based on ceramic proton conductors receive growing interest because these electrolytes of...
The need for reducing the operating temperature of solid-oxide fuel cells (SOFCs) imposed by cost re...
In this study, symmetrical films of BaFeO$_{2.67}$, BaFeO$_{2.33}$F$_{0.33}$ and BaFeO$_{2}$F were s...
This study characterizes BaCo0.7Fe0.2Nb0.1O3−δ (BCFN) perovskite oxide and evaluates it ...
This study concerned the preparation, characterisation and evaluation of different proton conductors...
Low-temperature solid oxide fuel cells (LT-SOFCs) have attracted significant attention because of the...
Reducing the operating temperature in the 500–750 C range is needed for widespread use of solid oxi...
The need for reducing the solid oxide fuel cell (SOFC) operating temperature below 600 °C is imposed...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °...
Reduction of the operating temperature to an intermediate temperature range between 350 °C and 650 °...
Barium ferrite and its hydrated form (BaFeO2.5−x+δ (OH)2x , BFO) is an interesting cathode material ...
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2006.In...
Cathode materials for proton-conducting ceramic fuel cells (PCFC) should combine electronic conducti...
N. Radenahmad and A. Afif are thankful to Universiti Brunei Darussalam for sponsoring the UBD gradua...
Fuel cells based on ceramic proton conductors receive growing interest because these electrolytes of...
The need for reducing the operating temperature of solid-oxide fuel cells (SOFCs) imposed by cost re...
In this study, symmetrical films of BaFeO$_{2.67}$, BaFeO$_{2.33}$F$_{0.33}$ and BaFeO$_{2}$F were s...
This study characterizes BaCo0.7Fe0.2Nb0.1O3−δ (BCFN) perovskite oxide and evaluates it ...
This study concerned the preparation, characterisation and evaluation of different proton conductors...
Low-temperature solid oxide fuel cells (LT-SOFCs) have attracted significant attention because of the...
Reducing the operating temperature in the 500–750 C range is needed for widespread use of solid oxi...
The need for reducing the solid oxide fuel cell (SOFC) operating temperature below 600 °C is imposed...