Novel Solid Phase Extraction and Mass Spectrometry Approaches to Multicomponent Analyses in Complex Matrices

Analysis of compounds present in complex matrices is always a challenge, which can be partly overcome by applying various sample preparation techniques prior to detection. Ideally, the extraction techniques should be as selective as possible, to minimize the concentration of interfering substances. In addition, results can be improved by efficient chromatographic separation of the sample components. The elimination of interfering substances is especially important when utilizing mass spectrometry (MS) as a detection technique since they influence the ionization yields. It is also important to optimize ionization methods in order to minimize detection limits. In the work this thesis is based upon, selective solid phase extraction (SPE) materials, a restricted access material (RAM) and graphitized carbon black (GCB) were employed for clean up and/or pre-concentration of analytes in plasma, urine and agricultural drainage water prior to liquid chromatography/mass spectrometry (LC/MS). Two SPE formats, in which GCB was incorporated in µ-traps and disks, were developed for cleaning up small and large volume samples, respectively. In addition, techniques based on use of sub-2 µm C18 particles at elevated temperatures and a linear ion trap (LIT) mass spectrometer were developed to improve the efficiency of LC separation and sensitivity of detection of 6-formylindolo[3,2-b]carbazole (FICZ) metabolites in human urine. It was also found that GCB can serve not only as a SPE sorbent, but also as a valuable surface for surface-assisted laser desorption ionization (SALDI) of small molecules. The dual functionality of GCB was utilized in a combined screening-identification/quantification procedure for fast elimination of negative samples. This may be particularly useful when processing large numbers of samples. SALDI analyses of small molecules was further investigated and improved by employing two kinds of new surfaces: oxidized GCB nanoparticles and silicon nitride