Sandstone Acidizing Using Chelating Agents and their Interaction with Clays

Sandstone acidizing has been carried out with mud acid which combines hydrochloric acid and hydrofluoric acid at various ratios. The application of mud acid in sandstone formations has presented quite a large number of difficulties like corrosion, precipitation of reaction products, matrix deconsolidation, decomposition of clays by HCl, and fast spending of the acids. There has been a recent trend to use chelating agents for stimulation in place of mud acid which are used in oil industry widely for iron control operations. In this study, two chelates, L-glutamic-N, N-diacetic acid (GLDA) and hydroxyethylethylene-diaminetriacetic acid (HEDTA) have been studied as an alternative to mud acid for acidizing. In order to analyze their performance in the application of acidizing, coreflood tests were performed on Berea and Bandera sandstone cores. Another disadvantage of mud acid has been the fast spending at clay mineral surfaces leading to depletion of acid strength, migration of fines, and formation of colloidal silica gel residue. Hence, compatibility of chelates with clay minerals was investigated through the static solubility tests. GLDA and HEDTA were analyzed for their permeability enhancement properties in Berea and Bandera cores. In the coreflood experiments conducted, it was found out that chelating agents can successfully stimulate sandstone formations. The final permeability of the Berea and Bandera cores were enhanced significantly. GLDA performed better than HEDTA in all applications. The substitution of seawater in place of deionized water for mixing purposes also led to an increased conductivity of the core implying GLDA is compatible with seawater. In the static solubility tests, chelates were mixed with HF acid at various concentrations. GLDA fluids kept more amounts of minerals in the solution when compared with HEDTA fluids. Sodium-based chelates when mixed with HF acid showed inhibited performance due to the formation of sodium fluorosilicates precipitates which are insoluble damage creating compounds. The application of ammonium-based chelate with HF acid was able to bring a large amount of aluminosilciates into the solution. The study recommends the use of ammonium-based GLDA in acidizing operations involving HF acid and sodium-based GLDA in the absence of the acid