Experimental investigation of carbon fiber reinforced poly(phenylene sulfide) composites prepared using a double-belt press

The high-performance carbon fiber reinforced poly(phenylene sulfide) composites were continuously fabricated using thermoplastic prepregs in a double-belt press. The effects of process velocity on the composite consolidation quality and mechanical properties were investigated. It is found that the tensile and interlaminar shear properties of composites prepared using the double-belt press are comparable to that of compression-molded composites when the process velocity is no more than 0.20 m.min(-1). The composite fracture morphologies also show different failure mechanisms between different samples and indicate that the interfacial adhesion strength may play a vital role in the mechanical properties of CF/PPS composites. Furthermore, experimental results show that the heating time above 330 degrees C should be over 440 s and the void content should be lower than 2.38% in order to obtain high performance CF/PPS composites. (C) 2015 Elsevier Ltd. All rights reserved