Electrocatalytic detection of pesticides with electrodes modified with nanoparticles of phthalocyanines and multiwalled carbon nanotubes

Three types of electrodes: carbon paste electrodes modified with nanoparticles of metallophthalocyanines (MPcNP-CPEs, M = Mn, Fe, Ni, Co), basal plane pyrolytic graphite electrodes modified with iron or nickel phthalocyanine nanoparticles and multiwalled carbon nanotube composites (FePcNP/MWCNT-BPPGE or NiPcNP/MWCNT-BPPGE),and basal plane pyrolytic graphite electrodes modified with multiwalled carbon nanotubes and electropolymerized metal tetra-aminophthalocyanines (poly-MTAPc-MWCNT-BPPGE), where M is Mn, Fe, Ni or Co, were prepared. Electrochemical characterizations showed that faster electron transfer kinetics occurred at the NiPcNP/MWCNT-BPPGE than at the FePcNP/MWCNT-BPPGE surface. SEM and electrochemical characterizations of poly-MTAPc-MWCNT-BPPGE showed that MTAPc had been deposited on the MWCNTBPPGE surface, and that the poly-CoTAPc-MWCNT-BPPGE exhibited the fastest electron transfer kinetics of all the poly-MTAPc-MWCNT-BPPGEs. Using amitrole and asulam as test analytes, electrochemical experiments showed that, amongst the CPEs, the FePcNP-CPE and NiPcNP-CPE displayed the most electrocatalytic behavior towards amitrole and asulam oxidation, respectively, and further experiments were done to obtain the electrochemical parameters associated with these electrodes and the corresponding analytes. Although, the FePcNP/MWCNT- BPPGE displayed electrocatalytic behavior towards amitrole oxidation in comparison with the bare BPPGE, it was less electrocatalytic than the FePcNP-CPE in terms of detection potential. The NiPcNP/MWCNT-BPPGE displayed the same detection potential as the NiPcNP-CPE. The poly-FeTAPc-MWCNT-BPPGE exhibited the most electrocatalytic behavior towards amitrole, of all the electrodes investigated, and the poly-CoTAPc-MWCNT-BPPGE displayed the best electrocatalytic behavior towards asulam, amongst the poly-MTAPc-MWCNT-BPPGEs