Topics
nitrogenMilitary unit
TEMTopical concept
transmission electron microscopeTopical concept
austeniteChemical substance
carbonMilitary unit
carbonitridingTopical concept
The article deals with the analysis of carbonitrided samples of S460MC microalloyed thermo-mechanically treated steel. The steel surface was saturated with carbon and nitrogen at the temperature of 860 °C. The nitrogen-methanole atmosphere with Amonnia addition was used for surface saturation in the process of carbonitriding. Oil hardening and tempering at 200 °C/1 hour followed after the diffusion saturation of experimental steel sample. The surface layer was composed of martensite, retained austenite and fine carbides of alloying elements. This was demonstrated with light microscopy and confirmed by TEM (transmission electron microscope). The paper also presents the results of chemical composition and hardness measurement
The research has been carried out on the effect of austenization process on hardness, microstructure...
The paper deals with the developments in HSLA in general and the effect of thermomechanical proces...
The microstructure of the investigated X153CrMoV12 grade tool steel in delivered condition consisted...
The article deals with the analysis of carbonitrided samples of S460MC microalloyed thermo-mechanica...
This paper reports an investigation of the influence of carbonitriding conditions for 20MnCr5 low al...
AbstractThis paper describes the effect of heat NH3-gas treatment of samples of plain carbon steel (...
The carbonitriding treatment is now a widely accepted industrial process to improve the strength of ...
To further enhance the performance of case hardening steels, the surface layer is thermochemically t...
This paper presents the experimental research of carbonitriding thermochemical processing in fluidiz...
International audienceMetallurgical and mechanical responses of alloys 16NiCrMo13 and 23MnCrMo5 to t...
Four different tool steel materials, P20, H13, M2 and D2, were nitrocarburised at 570°C in a flu...
The effect of the composition of two steels (B and 6MnCr5) on precipitation of undesirable phases (c...
Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in o...
The main objective of this study was to compare the carbonitriding and gaseous ferritic nitrocarburi...
This paper presents the results of industrial scale researches on the influence of the chemical comp...
The research has been carried out on the effect of austenization process on hardness, microstructure...
The paper deals with the developments in HSLA in general and the effect of thermomechanical proces...
The microstructure of the investigated X153CrMoV12 grade tool steel in delivered condition consisted...
The article deals with the analysis of carbonitrided samples of S460MC microalloyed thermo-mechanica...
This paper reports an investigation of the influence of carbonitriding conditions for 20MnCr5 low al...
AbstractThis paper describes the effect of heat NH3-gas treatment of samples of plain carbon steel (...
The carbonitriding treatment is now a widely accepted industrial process to improve the strength of ...
To further enhance the performance of case hardening steels, the surface layer is thermochemically t...
This paper presents the experimental research of carbonitriding thermochemical processing in fluidiz...
International audienceMetallurgical and mechanical responses of alloys 16NiCrMo13 and 23MnCrMo5 to t...
Four different tool steel materials, P20, H13, M2 and D2, were nitrocarburised at 570°C in a flu...
The effect of the composition of two steels (B and 6MnCr5) on precipitation of undesirable phases (c...
Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in o...
The main objective of this study was to compare the carbonitriding and gaseous ferritic nitrocarburi...
This paper presents the results of industrial scale researches on the influence of the chemical comp...
The research has been carried out on the effect of austenization process on hardness, microstructure...
The paper deals with the developments in HSLA in general and the effect of thermomechanical proces...
The microstructure of the investigated X153CrMoV12 grade tool steel in delivered condition consisted...
Add to ORKG