A study on the layer structure of W/C multilayers deposited by magnetron sputtering is reported. In the study, soft x-ray resonant reflectivity and hard x-ray grazing incidence reflectivity of the W/C multilayers were measured. The imperfections at the interface such as interdiffusion and formation of compounds were dealt with by two methods. On analyzing the experimental results, we found that the incorporation of an interlayer was a more suitable method than the traditional statistical method to describe the layer structure of a W/C system we fabricated. The optical constants of each layer at a wavelength of 4.48 nm were also obtained from the analysis. Copyright (C) 2008 John Wiley & Sons, Ltd
Several sputtered Ni/C multilayer mirrors with periods between 3.8 and 6.0 nm were investigated with...
Sc/Si multilayers were designed for normal incidence reflectivity in the wavelen gth range from 35 t...
International audienceWe have tested and validated a non-destructive analysis method of multilayer s...
Ultra-thin tungsten-carbon (W/C) and platinum-carbon (Pt/C) multilayers were fabricated using dc mag...
X-ray W/B multilayer mirrors with a period of 2.5 nm were deposited by dc magnetron sputtering and s...
Current technology has made possible the fabrication of multilayered optical elements for soft x-ray...
Pt/C x-ray multilayer, with varying period lengths d, ranging from 4.7 nm to 3.5 nm were made by de ...
Multilayer thin films are used as Bragg reflectors for soft x-rays in the energy range 50eV < E < 10...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 2002.Includes ...
We present an experimental study of the effect of layer interfaces on the x-ray reflectance in Cr/B4...
Multilayered coatings are routinely obtained in non-reactive processes employing multiple sources or...
Besides its importance for applications in XUV and soft X-ray optics, multilayer thin films are used...
There are many physical characterization approaches which evaluate a limited set of structural eleme...
We present the results from a systematic study of several different material combinations for multil...
The influence of B4C incorporation during magnetron sputter deposition of Cr/Sc multilayers intended...
Several sputtered Ni/C multilayer mirrors with periods between 3.8 and 6.0 nm were investigated with...
Sc/Si multilayers were designed for normal incidence reflectivity in the wavelen gth range from 35 t...
International audienceWe have tested and validated a non-destructive analysis method of multilayer s...
Ultra-thin tungsten-carbon (W/C) and platinum-carbon (Pt/C) multilayers were fabricated using dc mag...
X-ray W/B multilayer mirrors with a period of 2.5 nm were deposited by dc magnetron sputtering and s...
Current technology has made possible the fabrication of multilayered optical elements for soft x-ray...
Pt/C x-ray multilayer, with varying period lengths d, ranging from 4.7 nm to 3.5 nm were made by de ...
Multilayer thin films are used as Bragg reflectors for soft x-rays in the energy range 50eV < E < 10...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 2002.Includes ...
We present an experimental study of the effect of layer interfaces on the x-ray reflectance in Cr/B4...
Multilayered coatings are routinely obtained in non-reactive processes employing multiple sources or...
Besides its importance for applications in XUV and soft X-ray optics, multilayer thin films are used...
There are many physical characterization approaches which evaluate a limited set of structural eleme...
We present the results from a systematic study of several different material combinations for multil...
The influence of B4C incorporation during magnetron sputter deposition of Cr/Sc multilayers intended...
Several sputtered Ni/C multilayer mirrors with periods between 3.8 and 6.0 nm were investigated with...
Sc/Si multilayers were designed for normal incidence reflectivity in the wavelen gth range from 35 t...
International audienceWe have tested and validated a non-destructive analysis method of multilayer s...