Add to ORKGIn this study, tungsten oxide coatings with 13 and 75 at% of oxygen were prepared by DC reactive magnetron sputtering from a pure W target in an Ar+O2 atmosphere. The coating hardness (H) decreased with increasing oxygen content from 25 to 7.7 GPa. The values of H/E ratio were 0.08 and 0.07 for W87O13 and W25O75, respectively.http://www.sciencedirect.com/science/article/B6TW4-4NG3T6T-3/1/f9d8350fca3dc06d1dc34428f36c4c0
The variations of microstructure, mechanical properties, and oxidation behavior of Mo-V-Cu-N coating...
In this study mid-frequency pulsed-DC magnetron sputtering was used to deposit W-B-C coatings. The e...
WC-Co coatings with low degree of WC decomposition were deposited from electroless Ni-plated micro- ...
In this study, tungsten oxide coatings with 13 and 75 at% of oxygen were prepared by DC reactive mag...
Tungsten oxide coatings were deposited without substrate bias by DC reactive magnetron sputtering of...
The present research was carried out with the aim of studying the influence of oxygen concentration ...
The thermal stability of different W-O coatings, W100, W90O10, W54O46, W30O70 and W25O75, were studi...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
The tribological properties of nitrides and oxides of transition metal thin films deposited by react...
In this study, tungsten oxide coatings were deposited by dc magnetron sputtering onto steel, glass a...
The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coa...
Metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films, deposited by Pulsed Laser Dep...
AbstractW–S–N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low...
W–S–N films were deposited by reactive magnetron sputtering from WS2 target in Ar/N2 atmosphere. Bes...
A new design of decorative tungsten oxide coatings is presented. The coatings were deposited with gr...
The variations of microstructure, mechanical properties, and oxidation behavior of Mo-V-Cu-N coating...
In this study mid-frequency pulsed-DC magnetron sputtering was used to deposit W-B-C coatings. The e...
WC-Co coatings with low degree of WC decomposition were deposited from electroless Ni-plated micro- ...
In this study, tungsten oxide coatings with 13 and 75 at% of oxygen were prepared by DC reactive mag...
Tungsten oxide coatings were deposited without substrate bias by DC reactive magnetron sputtering of...
The present research was carried out with the aim of studying the influence of oxygen concentration ...
The thermal stability of different W-O coatings, W100, W90O10, W54O46, W30O70 and W25O75, were studi...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
The tribological properties of nitrides and oxides of transition metal thin films deposited by react...
In this study, tungsten oxide coatings were deposited by dc magnetron sputtering onto steel, glass a...
The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coa...
Metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films, deposited by Pulsed Laser Dep...
AbstractW–S–N coatings deposited by reactive magnetron sputtering offer the possibility of ultra-low...
W–S–N films were deposited by reactive magnetron sputtering from WS2 target in Ar/N2 atmosphere. Bes...
A new design of decorative tungsten oxide coatings is presented. The coatings were deposited with gr...
The variations of microstructure, mechanical properties, and oxidation behavior of Mo-V-Cu-N coating...
In this study mid-frequency pulsed-DC magnetron sputtering was used to deposit W-B-C coatings. The e...
WC-Co coatings with low degree of WC decomposition were deposited from electroless Ni-plated micro- ...